The report is prepared for development of a modern network for a multi building campus after analysis of the requirement of the services for the University campus. A diagram of the network frame work is created and scope and limitation of the project is analysed for development of the solution of the solution design. The security feature and policy that is essential for maintaining the security of communication between the user is documented in the report by analysing the service and policies of the organization.
The following diagram is created for the demonstration of the building plan and it can be used for the analysis of the network deployment for the university and identification of the location of the installation of the wireless access point.
The main scope of the project for the development of the network are listed below:
The main requirement for the development of the network framework for the campus is given below:
The design is created after analysis of the area that is needed to be covered with the wired and wireless network for connecting the user from the different branches and departments of the university. A firewall is needed to be installed at the entry and exit point of the network for management of the network traffic and securing the network from the external agents to reach the university server and secure the information residing in the servers. The wireless access point is needed to be connected in different subnet such that the users connected with the wireless network should not be able to access the wired network and the security of the wired network is not hampered.
For the development of the network the hierarchical design model is selected that helps in breaking the network into different modular groups and allow each of the layer to perform different specific function following the requirement of the university. It also helps in simplifying the structure and the design for easy management of the network devices. The modularity of the network helps in replication of the elements used for design and thus improves the scalability of the network. Redundant links are used for connecting the network devices that helps in increasing the availability of the network since if one of the link fails the data packets can reach the destination using the other link available. The following are the three layers of the hierarchical design such as:
Core – In this layer the main network device are configured and connected with the distribution layer for the management of the large local area network environment.
Distribution – In this layer the access layer is aggregated for allowing connectivity with the different services configured in the core devices of the network.
Access layer – It is used for connecting the hosts or the end point users with the network and enabling them access to the network directly.
Since five building are needed to be connected a dedicated distribution layer is needed for providing network based services and sharing connectivity with the devices connected with the access layer. The quality of service for the application should be configured for management of the performance of the network.
The protocols used for the configuration of the network device are given below:
DHCP – It is used for automatically assigning the Ip address to the hosts connected in the network and it is needed to be configured according to the vlan for each of the subnet.
PPP – It is used for establishment of direct connection with the admin Pc and access the network device without ant delay due to congestion in the data traffic of the network.
Frame Relay – This is used for packet switching and transmitting the voice and the data packets using the same communication channel. It helps in reducing the communication cost for the organisation.
NAT – It is used for mapping the port address with an Ip address for increasing the security of the network. It also decrease the needs of the IP address and the configuration of the NAT the router Is needed to be configured with HSRP protocol.
PAT – It is an extension of the NAT protocol used for mapping multiple devices connected in the network into a single IP address.
HDLC – It is a set of protocol used for combining the data packets in the form of a frame and sent over the network to verify the data packets.
Major Network: 192.168.20.0/23
Available IP addresses in major network: 510
Number of IP addresses needed: 39
Available IP addresses in allocated subnets: 48
About 13% of available major network address space is used
About 81% of subnetted network address space is used
|
Subnet Name |
Allocated Size |
Address |
Mask |
Assignable Range |
Dec Mask |
Broadcast |
|
Subnet 1 |
6 |
192.168.20.56 |
/29 |
192.168.20.57 – 192.168.20.62 |
255.255.255.248 |
192.168.20.63 |
|
Subnet 2 |
6 |
192.168.20.0 |
/29 |
192.168.20.1 – 192.168.20.6 |
255.255.255.248 |
192.168.20.7 |
|
Subnet 3 |
6 |
192.168.20.8 |
/29 |
192.168.20.9 – 192.168.20.14 |
255.255.255.248 |
192.168.20.15 |
|
Subnet 4 |
6 |
192.168.20.16 |
/29 |
192.168.20.17 – 192.168.20.22 |
255.255.255.248 |
192.168.20.23 |
|
Subnet 5 |
6 |
192.168.20.24 |
/29 |
192.168.20.25 – 192.168.20.30 |
255.255.255.248 |
192.168.20.31 |
|
Subnet 6 |
6 |
192.168.20.32 |
/29 |
192.168.20.33 – 192.168.20.38 |
255.255.255.248 |
192.168.20.39 |
|
Subnet 7 |
6 |
192.168.20.40 |
/29 |
192.168.20.41 – 192.168.20.46 |
255.255.255.248 |
192.168.20.47 |
|
Subnet 8 |
6 |
192.168.20.48 |
/29 |
192.168.20.49 – 192.168.20.54 |
255.255.255.248 |
192.168.20.55 |
IPv6
|
Subnet Name |
Allocated Size |
Address |
Mask |
Assignable Range |
Dec Mask |
Broadcast |
|
Subnet 1 |
6 |
192.168.20.56 |
/29 |
2002:c0a8:1439:0:0:0:0:0 – 2002:c0a8:143e:0:0:0:0:0 |
2002:ffff:fff8:0:0:0:0:0 |
2002:c0a8:143f:0:0:0:0:0 |
|
Subnet 2 |
6 |
2002:c0a8:1400:0:0:0:0:0 |
/29 |
2002:c0a8:1401:0:0:0:0:0 |
2002:ffff:fff8:0:0:0:0:0 |
2002:c0a8:1407:0:0:0:0:0 |
|
Subnet 3 |
6 |
2002:c0a8:1408:0:0:0:0:0 |
/29 |
2002:c0a8:1409:0:0:0:0:0- 2002:c0a8:140e:0:0:0:0:0 |
2002:ffff:fff8:0:0:0:0:0 |
2002:c0a8:140f:0:0:0:0:0 |
|
Subnet 4 |
6 |
2002:c0a8:1410:0:0:0:0:0 |
/29 |
2002:c0a8:1411:0:0:0:0:0 – 2002:c0a8:1416:0:0:0:0:0 |
2002:ffff:fff8:0:0:0:0:0 |
2002:c0a8:1417:0:0:0:0:0 |
|
Subnet 5 |
6 |
2002:c0a8:1418:0:0:0:0:0 |
/29 |
2002:c0a8:1419:0:0:0:0:0 – 2002:c0a8:141e:0:0:0:0:0 |
2002:ffff:fff8:0:0:0:0:0 |
2002:c0a8:141f:0:0:0:0:0 |
|
Subnet 6 |
6 |
2002:c0a8:1420:0:0:0:0:0 |
/29 |
2002:c0a8:1421:0:0:0:0:0 – 2002:c0a8:1426:0:0:0:0:0 |
2002:ffff:fff8:0:0:0:0:0 |
2002:c0a8:1427:0:0:0:0:0 |
|
Subnet 7 |
6 |
2002:c0a8:1428:0:0:0:0:0 |
/29 |
2002:c0a8:1429:0:0:0:0:0 – 2002:c0a8:142e:0:0:0:0:0 |
2002:ffff:fff8:0:0:0:0:0 |
2002:c0a8:142f:0:0:0:0:0 |
|
Subnet 8 |
6 |
2002:c0a8:1430:0:0:0:0:0 |
/29 |
2002:c0a8:1431:0:0:0:0:0 – 2002:c0a8:1436:0:0:0:0:0 |
2002:ffff:fff8:0:0:0:0:0 |
2002:c0a8:1437:0:0:0:0:0 |
For increasing the security of the network IDS, IPS and firewalls should be installed along with the use of password based authentication for the management of the access of the network device to the users connected in then network. The threats associated with the network should be easily identified and the unauthorised access of the user should be prevented for keeping the data and resources safe from the intruders.
A policy should be set for allowing the user to use the wireless service and accessing the university server. The students and the staffs should access the server with their username and password and should not connect any device with the wired network [2]. The use of portable devices should also be restricted because it may contain virus, malware or spyware that can infect the device and compromise the security of the network.
A good security practice should be followed for the network for the management of the data traffic in the network. The flow of traffic should be monitored with the use of network monitoring tool and the servers and the network device configuration should be backed up in remote location or cloud servers such that if the security of the network is compromised no data is lost [1]. The switches should also be configured with multiple VLAN such that connected with redundant connection for increasing the availability and uptime of the network.
For analysing the WAN and the LAN services different types of tests are needed to be performed on the network. The devices that are needed for the configuration of the network is analysed and a prototype of the network is created for the identification of the errors in the final design of the network. The number of users accessing the wireless access point should also be identified for the configuration of the VLAN for the wireless network. The area of coverage of the wireless network should also be identified for the analysis of the number of devices needed to be installed for the management of the connectivity of the users using the WLAN services.
The floor plan of the building and number of users for each of the subnet is needed to be identified for the preparation of the subnet plan and selection of the network topology that is needed for connecting the users with the network. The organizational policy is needed to be developed for enabling the users to connect their wireless device with the organizational network. For each of the department a separate server is needed to be installed for management of the activity of the user and it should be configured with DHCP pool for automatically assigning the Ip address to the device connected in the subnet and reduce the complexity of management of the network device.
The requirement of the network is listed and a solution design is proposed aligning the current framework of the campus. There are different network technologies that are available for the development of the network infrastructure and the protocols, technologies and services required for the development of the network framework is analysed for the development of the network. An IPv4 and IPv6 IP address plan is created that is needed for configuring the network device interface and enable the different department of the campus to communicate with each other.
References
Essay Writing Service Features
Our Experience
No matter how complex your assignment is, we can find the right professional for your specific task. Contact Essay is an essay writing company that hires only the smartest minds to help you with your projects. Our expertise allows us to provide students with high-quality academic writing, editing & proofreading services.
Free Features
Free revision policy
$10Free bibliography & reference
$8Free title page
$8Free formatting
$8How Our Essay Writing Service Works
First, you will need to complete an order form. It's not difficult but, in case there is anything you find not to be clear, you may always call us so that we can guide you through it. On the order form, you will need to include some basic information concerning your order: subject, topic, number of pages, etc. We also encourage our clients to upload any relevant information or sources that will help.
Complete the order form
Once we have all the information and instructions that we need, we select the most suitable writer for your assignment. While everything seems to be clear, the writer, who has complete knowledge of the subject, may need clarification from you. It is at that point that you would receive a call or email from us.
Writer’s assignment
As soon as the writer has finished, it will be delivered both to the website and to your email address so that you will not miss it. If your deadline is close at hand, we will place a call to you to make sure that you receive the paper on time.
Completing the order and download
