The transport layer of the TCP/IP appear, the data transmission is done using UDP and TCP. In the present years, Stream Control Transmission Protocol (SCTP) is introduced for transmitting the data stream and the data residing in the transport layer can be broken into different segments and transmitted to the host using the network layer. The data transferred using the transport layer are isolated into segments and sent using the network layer. The parts are also broken into datagram and switch over the web. The objective PC where the data is sent needs to sit tight for the datagram to get in touch with them, they are accumulated to shape the section, and the vehicle is done.
The internet and the transport layer differs from each other because both the layers uses different protocol for data communication and both have different functionality. The datagram received from a network layer is broken down into small chunks and is forwarded to the Ethernet frames. The UDP protocol of the transport layer uses the datagram size, checksum from the IP address and transmission of the data packets in the network.
In case of multiplex services the port number used in the UDP protocol is essential for differentiating the services arriving from different point in the network or from the same host address. Using the IP address it is not possible to differentiate the service for the different hosts communicating with each other in the network. When a packet reaches the destination address the packet is required to be used by a specific application running on the host. A de multiplexing logic is required for identification of the packets and which application is required to use the data packets determining the port address. The port information can be fetched using the UDP protocol and IP uses the port address for delivering the packet to the destination application.
The DDoS attack is defined as distributed denial of service and this can compromise multiple system and the main victims of the DDoS are the target and the systems used for reaching the target. Many sources can be involved for the DDoS attack and multiple computers and internet connection are used for the attack. For the DDoS attacks both the TCP and UDP connections can be used and use of the connection depends on the hacker using the path for flooding the system. The UDP connection consumes less network resource because it uses a three way handshake protocol. The hackers can use the TCP connection to send an incomplete HTTP request that causes the server not to time out and thus the hacker have the time for flooding the server with numerous number of request. For DDoS attack using UDP the hacker enters the system by selecting a random port from a remote host and check the response of the host. If the application responds the port number is used for attack.
= 00011101
OR Result
|
Result in binary |
11101110 |
|
Result in decimal |
238 |
|
Result in hexadecimal |
ee |
11100010 and 00001110
AND Result
|
Result in binary |
10 |
|
Result in decimal |
2 |
|
Result in hexadecimal |
2 |
1111111.11100000.11111100.00000000
It is not a lawful subnet due to the fact that a subnet cover is required to be loaded with 1 from the left hand side. Thus the option documentation is required to be utilized and with/x and the x is portrayed as the quantity of 1 bits. It likewise indicates the bits from the left hand side that can be utilized for the recognizable proof of the system and the bits that can be overlooked levy to their distinction from each of the hub in the subnet.
A valid Prefix for 4 bit wide net is /28 (32-4) with subnet mask 255.255.255.240 only. It results in 11111111 11111111 11111111 11110000.
|
Subnet Name |
Needed Size |
Allocated Size |
Address |
Mask |
Dec Mask |
Assignable Range |
Broadcast |
|
A |
250 |
254 |
205.67.32.0 |
/24 |
255.255.255.0 |
205.67.32.1 – 205.67.32.254 |
205.67.32.255 |
|
B |
250 |
254 |
205.67.33.0 |
/24 |
255.255.255.0 |
205.67.33.1 – 205.67.33.254 |
205.67.33.255 |
|
C |
250 |
254 |
205.67.34.0 |
/24 |
255.255.255.0 |
205.67.34.1 – 205.67.34.254 |
205.67.34.255 |
All the IPs are in class c network
The collision cannot be detected by analyzing the power level of the medium and the measurement of the power level of the RF medium is not possible. If the collision cannot be detected then the collision cannot be avoided. The detection of the collision in a network helps to avoid it and give better performance. The CSMA/CD is used to check the collision in the network and transmit the data packets in the network according to the collision detected in the system. If a collision is detected in the network the device sending the data packets have to wait for a random time for receiving the acknowledgement and the end device would also have to wait for receiving the data packets. This process works for the wired network but in case of the wireless networks there is no possible methods for the detection of collision in the network and thus the sender and the receiver can send and receive data packets but cannot sense the medium used for the transmission of the data packets. Thus for avoiding the collision in the wireless medium the CSMA/CA is used that consists of some control messages for avoiding the collision in the network and decrease the waiting time.
The scope of the wifi get to point is 15m though the extent of the room is 60 by 40 meter in measurement. If a get to point on channel 1 is transmitting, all the adjoining customers and the get to point with a similar divert would bring about postponement in the transmission. The result is that throughput is inimically affected. Near to get to focuses and clients need to hold up any more drawn out to transmit in light of the way that they have to continue. The futile medium question overhead that occurs in light of the fact that all the get to focuses are on a comparable channel is called co-channel impedance (CCI). The settled channel portion can be swapped by unique channel assignment for settling the issue confronted by the staffs confronted in the stock.
The wireless access point is required to be reconfigured and security encryption is required to be applied that would restrict the unauthorized to access the network. Currently the WPA2 PSK is required to be used for creation of an encryption key. The password used as the encryption is required to be a combination of text, special character and numerical such that it is secured from brute force attack. The organization have the requirement of secure the wireless network with a strong encryption algorithm. The unauthorized access of the wireless network can lead to a risk for the data loss and hacking of the organizational information causing a huge loss for the company. The customer records can be stolen for illegal use and different security rules is required to be applied for securing the network. The password for the wireless device should be changed frequently such that the password cannot be breached.
Aazam, M., Khan, I., Alsaffar, A.A. and Huh, E.N., 2014, January. Cloud of Things: Integrating Internet of Things and cloud computing and the issues involved. In Applied Sciences and Technology (IBCAST), 2014 11th International Bhurban Conference on (pp. 414-419). IEEE.
Anwar, Z. and Malik, A.W., 2014. Can a DDoS attack meltdown my data center? A simulation study and defense strategies. IEEE Communications Letters, 18(7), pp.1175-1178.
Choi, J., Choi, C., Ko, B. and Kim, P., 2014. A method of DDoS attack detection using HTTP packet pattern and rule engine in cloud computing environment. Soft Computing, 18(9), pp.1697-1703.
Gupta, V. and Joshi, H., Electronics For Imaging, Inc., 2016. Device discovery using broadcast technology. U.S. Patent 9,294,574.
Jagannathan, K., Markakis, M.G., Modiano, E. and Tsitsiklis, J.N., 2014. Throughput optimal scheduling over time-varying channels in the presence of heavy-tailed traffic. IEEE Transactions on Information Theory, 60(5), pp.2896-2909.
Jin, F., Chen, G., Liu, J. and Zhu, T., 2013. Model and layered calculation process for Chinese railway network vehicle flow estimation. Advances in Transportation Studies.
Jin, F., Chen, G., Zhu, T. and Gao, C., 2015. Study on the Layered Calculation Model for Railway Network Car Flow Estimation. In LISS 2013 (pp. 147-152). Springer Berlin Heidelberg.
Lariviere, R., Chenard, S.J.H., Waines, G., Baker, B.N. and Mousseau, G., Rockstar Consortium Us Lp, 2014. Methods and systems for providing a logical network layer for delivery of input/output data. U.S. Patent Application 14/471,122.
Li, C.Z., Chang, C.Y., Zang, Y., Ju, H.X., Chueh, C.C., Liang, P.W., Cho, N., Ginger, D.S. and Jen, A.K.Y., 2014. Suppressed charge recombination in inverted organic photovoltaics via enhanced charge extraction by using a conductive fullerene electron transport layer. Advanced Materials, 26(36), pp.6262-6267.
Li, X., Choy, W.C., Xie, F., Zhang, S. and Hou, J., 2013. Room-temperature solution-processed molybdenum oxide as a hole transport layer with Ag nanoparticles for highly efficient inverted organic solar cells. Journal of Materials Chemistry A, 1(22), pp.6614-6621.
Nadeem, A. and Howarth, M.P., 2013. A survey of manet intrusion detection & prevention approaches for network layer attacks. IEEE Communications surveys and tutorials, 15(4), pp.2027-2045.
Naik, M., 2015. Early Detection and Prevention of DDOS attack on VANET (Doctoral dissertation).
Wang, B., Zheng, Y., Lou, W. and Hou, Y.T., 2015. DDoS attack protection in the era of cloud computing and software-defined networking. Computer Networks, 81, pp.308-319.
Wang, Y. and Qiu, D., 2016, August. A method of synthetical fault diagnosis for power system based on fuzzy hierarchical Petri net. In Mechatronics and Automation (ICMA), 2016 IEEE International Conference on (pp. 254-258). IEEE.
Xie, P., Cai, Z., Guo, C., Liu, P., Chen, Z., Zhang, Y., Han, Y. and Li, L., 2016, October. Traffic flow calculation method for substation communication network. In PES Innovative Smart Grid Technologies Conference Europe (ISGT-Europe), 2016 IEEE (pp. 1-6). IEEE.
Zhao, D., Sexton, M., Park, H.Y., Baure, G., Nino, J.C. and So, F., 2015. High?Efficiency Solution?Processed Planar Perovskite Solar Cells with a Polymer Hole Transport Layer. Advanced Energy Materials, 5(6).
Essay Writing Service Features
Our Experience
No matter how complex your assignment is, we can find the right professional for your specific task. Contact Essay is an essay writing company that hires only the smartest minds to help you with your projects. Our expertise allows us to provide students with high-quality academic writing, editing & proofreading services.
Free Features
Free revision policy
$10Free bibliography & reference
$8Free title page
$8Free formatting
$8How Our Essay Writing Service Works
First, you will need to complete an order form. It's not difficult but, in case there is anything you find not to be clear, you may always call us so that we can guide you through it. On the order form, you will need to include some basic information concerning your order: subject, topic, number of pages, etc. We also encourage our clients to upload any relevant information or sources that will help.
Complete the order form
Once we have all the information and instructions that we need, we select the most suitable writer for your assignment. While everything seems to be clear, the writer, who has complete knowledge of the subject, may need clarification from you. It is at that point that you would receive a call or email from us.
Writer’s assignment
As soon as the writer has finished, it will be delivered both to the website and to your email address so that you will not miss it. If your deadline is close at hand, we will place a call to you to make sure that you receive the paper on time.
Completing the order and download