For any organization the establishment of a proper risk assessment system over any specific plant or location is integral. Not only is the factor integral for the safety and welfare of the people who are going to indulge in the process of creating a new structure at a specific location but will also keep the people who will come to the particular establishment for the many coming years. The generalized focus on risk assessment specifically of this situation became more apparent in the past few decades with the analysis of situations where buildings and infrastructures were created over a specific landform which then wiki my problem and even lead to the loss of many people (Aven ,2016). Not only there is a major amount of loss in life but also a major monetary loss for any organization after spending millions of dollars in creating infrastructural space for themselves which in terms does not work out the way it is supposed to do. The following work focuses on analyzing search ideas in its way through risk management analysis.
The focus of the following work will be through the eyes of a company that is proposing to construct a new bio-oil production pilot plant facility utilizing waste biomass in a previously created industrial site at the Brisbane Fort (Zio, 2018). The focus of the following work will be first to identify the key component of safety and environmental legislation along with regulation and industry code to further analyze the core 5 hazards of each of these steps of the process of the analysis and further focus on a risk assessment which includes control for each hazard. Further, the work will also additionally carry out hazard identification and risk assessment for the extra hazards which can be focused on the operation of a new plant.
Key components of safety and environmental legislation, regulation, and industry code for the following steps-
Before indulging in the construction of any location for any form of industrial purpose it is integral to analyze the current existing space and the absolute plant in its way. The need for the same comes from the standards act of 1947 suggest the safety and health of workers in the workplace along with the idea to felicitate the establishment of a comfortable working environment by promoting a systematic countermeasure as well as comp behind safe and concerning the process in prevention of any accidents that can occur in the industrial area (Dekkers et al., 2016). The key safety and environmental legislation, as well as regulation and industry code in the process of removal of existing locations where a new plant or establishment will be created, is to first analyze the location with proper understanding and careful inspection to see the probability of the condition.
It is also crucially important that the location’s foundation gets analyzed with proper assurance for it to be strong enough so that is stronger foundation can be created for the building. In the process of the removal of the currently existing plant, it is important to analyze properly the activities that are taking place in the following establishment so that there is a scope of change that can happen at this particular stage itself (Eales,2016). If no specific action is taken in the right way at this particular step chances are that it can lead to a major impact in the future. This is the very reason why proper regulations and the industrial court also suggest creating a proper analysis before starting to work on a specific establishment and allocation and providing the assessment sheet to the government to stay assured if any kind of misfortunate incidents happens in the coming future.
The key components of safety and environmental legislation, as well as regulation with industry code, keep in mind during the process of the construction of the new plant is to assure that the right equipment is used in the right way. Even there is a specific criterion with governments and their regulation to bring forth the right equipment that is issued with the license provided by the government of proper safety (Suter,2016). Apart from that, there is also a direct regulation that suggests that in the time of the construction of a new plant there should be the availability of proper means which can help any kind of employee or people engaging in the construction work by getting proper first aid at the fastest moment possible (Gerba,2019). This is not only integral but also can assure that the life of many is saved specifically workers who work in such hazardous conditions to rest assure create a proper working establishment.
Working on the new plant in its way will require the need of creating a proper component analysis of safety and environmental legislation as well as regulation and industry code that follows the process in the best possible manner (Stevenson,2018). After the construction of a particular site, the whole process of risk assessment does not stop with the concept of safety and environmental legislation (Eales,2016). On the other hand, by understanding the situation in the condition of the following land on which the establishment is created in there is a major chance and scope that new and different kinds of integral advice are provided with proper risk management methods taken into consideration as to how the management of the particular place will become a success and the location will remain successful for a longer period for all the people who are going to live and work under the following roof (Paltrinieri, Comfort and Reniers,2019). The other key idea of legislation comes with the analysis of the land as well as the establishment for every few years which is a regulatory order given by the government to every building constructed around the city to assure that the quality of the foundation of the buildings remains intact and there are no flaws in the system of the design of the building as well as no immediate pressure or dangers on the people who will be working constantly in this particular establishment which is about to be converted into a new bio-oil production pilot plant facility that uses waste biomass (Heys et al.,2016).
Identification of 5 hazards of each step and their risk assessment utilizing the hierarchy of controls when recommending control measures to address the hazard.
Small cool boiler and pressure vessel
2 storage tanks with piping connected to the vessel
Asbestos
Pressure level of the tank and the vessels
Location of the following plant near the Brisbane port
The risk assessment of the small cool boiler and pressure measure based vessel under the circumstances and analysis of the hierarchy of control can directly put forth the idea that it meets to have proper administrative control. The reason behind the same comes from the fact that these boilers and pressure measure vessels can be utilized in the new factory yet there is a higher scope that they can also hurt the infrastructure.
The storage tanks with piping connected to the vessels are something that can be utilized all over again with the choice of protecting the word car with personal protective equipment in the process of cleaning this storage tank and with piping connected with the vessels. This particular equipment as it has direct relativity with being utilized in the new organizational setup has the potential of being reused more appropriately.
Asbestos in their way is considered a majorly hazardous product that has the capability of causing major formulations of cancer among humans. This is the very reason why this particular contamination at the already existing industrial plant should be eliminated or in simple terms physically removed as a hazard.
The pressure level of the tank and vessel is something that needs has to be there in creating an administrative control over the same where it can help in creating a change in the way the extraction process of the oil will be done with biomass. The pressure level of the tank and vessel can help in breaking the oil faster than it can by other means and in more natural ways which will make it an integral prospect for the current industry and should be taken under administrative control.
The location of the following space to be near an airport or a water body makes it a risky location as the chances of any kind of leakage of the previous industry substances as well as the current industry will create a problematic issue as it can contaminate the water bodies. This is the reason why the issue can be handled with administrative control to be kept in mind. As the decision and the particular plant has already been selected for the work there cannot be changes coming from the pre-existing organization’s plant. The best-suited action in the following case will be to change the way people work in the following recognized location and focus on creating a proper and systematic way of working that can help avoid such circumstances.
– Utilization of sodium hydroxide catalyzed the process of conversion of water Biomass into oil
– Expressive use of waste Biomass in the following location and will be kept in the stock file.
– Utilization of various chemical-based tanks
– Higher footprint
– Location situated near a water body.
Utilization of sodium hydroxide can lead to major incidents is taking place in the following area however it cannot be eliminated or substituted as it can be not replaced in the process of creating the bio-oil so it should be under engineering controls which is focused on isolating people from the hazard as much as possible and kept underground in the vessels that are already present within the establishment.
Excessive use of waste Biomass in the following work can directly lead to the integration of various diseases in the specific area which can only be created and turned into a way where the protection should be provided to the workers with personal protective equipment so that none who deal with the Biomass get in contact with so that they can not face any kind of major diseases.
Putting the Biomass in an open space is also is risky Idea as most of it will be started outside as long as it is not in use for creating the bio-oil when in contact with Sodium Hydroxide. the best way of dealing with the same is to change the whole process by creating an Engineering control where people will be isolated from the hazard which means instead of keeping people away from the hazard the whole Biomass will be kept contained in a specific place so that it cannot become a problem.
Utilization of various chemical waste tanks is an essential prospect that is a considerable e risk for the following locations. however, it can be controlled with the utilization of the proper administrative control. if the establishment has a proper set of rules which not only utilizes a systematic overview of these chemicals in a way where they cannot get directly in contact chances are that the issue will not become a major problem.
– As it can be seen that the following location in the following conversion of biomass into bio-oil has a higher footprint and can directly affect the environment in various ways. the waste hierarchy of control to be utilized in the following situation should be eliminated yet it cannot take place so instead, the focus will be to replace the hazard or substitution. Most of the products and substances in the following case cannot be completely transformed or replaced yet there is a possible scope and a possible understanding of changing by substituting some elements which can be changed in the right way.
The following location of the following space near a port is a direct reference showing the scope of contaminating the following water body. The best-suited action to be taken into consideration in such a case is to create a proper which through which people change the administrative control in the following location Which is focused on changing the way people work and react in the following location to stop any instances where any kind of contamination can take place.
– lack of stability of the soil due to being situated around a water body.
– the impact of the previously established industry factory
-scope of chemical leakage and Biomass leakage that can lead to various diseases
– scope of a chemical leak in the water bodies
– working with Biomass
The lack of stability within the soil can be a huge problem specifically for locations some word closer to water bodies. the best hierarchy of control to be taken into consideration in this particular situation will be to create administrative control over the situation. changing the way people work will reduce the chances of creating any kind of violation of the system that can lead to major incidence is taking place.
The impact of the previously present industry will not be that relevant in the following locations for a few years but its effect can become visible after a few years if there are specific points of the situation to make their presence felt. this can only be taken into consideration with the utilization of personal protective equipment taken into consideration at all times. the organization will make sure that most of the work that will be done near the baseline of the factory will be done with proper personal protective equipment so that no such incident can take place.
The scope of chemical leakage for Biomass leakage is used in the following case yet if the proper hierarchy of control can help the situation not become you which can be to create a proper administrative control which helps in changing the way people work.
The scope of chemical League in the water body is way too vast and problematic and can cause a major issue if not controlled in the right way stop the best way to control the same can be to utilize engineering control which isolates people from the hazard or the one which is facing the impact of the hazard. this transformation for the following situation means isolating the water bodies from the has a heart which can only be done by protecting the internal and external areas of the industry and not letting them get in contact with water bodies.
Getting in contact with Biomass way too much can lead to the initiation of various diseases and as considerable as something that can lead to various kinds of other issues. To control the same the best alternative option to be taken into consideration is to protect the workers with personal protective equipment which will not only are sure that they do not come in contact with the Biomass but also save them from any impact of the Biomass if any kind of reaction occurs.
3. Additional hazard identification and risk assessment through application of a situation when the modified plant is modified to produce hydrogen from the Biomass and the hydrogen are stored on-site before transport in the case of the operations of the new plant.
– Sodium hydroxide leakage
– Ignited fire
– Sodium Hydroxide leakage occurs which has directly potential dangerous effects on humans. if a person briefs the Sodium Hydroxide chances are it can hurt or burn them and can cause immediate formatting, diarrhea and chest pain, stomach pain along with swallowing difficulty.
However, with be stored hydrogen kept in the following location chances are that when in contact with sodium hydroxide and hydrogen converts itself into water. This will not only help in reducing the effect of sodium hydroxide but completely help in transforming the situation that has occurred due to the Sodium Hydroxide leakage.
– in case any kind of fire breaks out within the establishment chances are that it can only be controlled with the utilization of hydrogen which when in contact with oxygen converts into water. This water will then be used in assuring to help control the situation as much as it can be and reduce the damages that can be made in a chemical plant where the effect can directly create issues near the water body as well.
Conclusion
It can further be concluded that risk assessment of the following location is necessary as it gathers various kinds of risk under its wing. there are various chances and scopes swear various incidents can occur. But if taken with precaution and assessment into consideration the chances of major issues taking place are accidents happening before or even during the time of construction will be reduced. apart from that, the scenario of proper and systematic maintenance of the following location can only be done if the organization shows focus on the hierarchy of controls that it needs to take in any situation by properly considering the effect of the situation and what can be done to help control the situations. Apart from that, it is also essential in the following cases to be assured have proper backups and safety measures to be taken into consideration at all scales. The various changes through which major accidents can take place in the following location. this can only be controlled with a better understanding of the situation taken into consideration. Apart from the earth, It should have been the focus to have a controlled environment where the establishment and industries function so that no major occurrences can take place.
Using the risk assessment calculator
The people who are working at the following is established are the ones who faced the major amount of rays in the following case.
Probability- remotely possible
Exposure- occasional
Possible consequences- numerous fatalities- catastrophe
Risk score – very high risk.
The utilization of the hydrogen tanks is kept within the industry as the contact of hydrogen with Sodium Hydroxide convert it into water.
Keeping Sodium Hydroxide as a hazardous chemical into consideration and always away from claimable objects and positions within the industry.
The control measure that was finally applied to control the exposure of sodium hydroxide into converting into the fire was by assuring to store hydrogen within the inner tanks of the specific industry so that when in contact can convert into water.
References
Aven, T. (2016). Risk assessment and risk management: Review of recent advances on their foundation. European Journal of Operational Research, 253(1), pp.1-13.
Dekkers, S., Oomen, A.G., Bleeker, E.A., Vandebriel, R.J., Micheletti, C., Cabellos, J., Janer, G., Fuentes, N., Vázquez-Campos, S., Borges, T. and Silva, M.J.(2016). Towards a nonspecific approach for risk assessment. Regulatory Toxicology and Pharmacology, 80, pp.46-59.
Eales, N. (2016). Risk assessment. In Missing Persons (pp. 180-189). Routledge.Force, U.S.P.S.T.
Gerba, C.P. (2019). Risk assessment. In Environmental and pollution science (pp. 541-563). Academic Press.
Heys, K.A., Shore, R.F., Pereira, M.G., Jones, K.C. and Martin, F.L. (2016). Risk assessment of environmental mixture effects. RSC advances, 6(53), pp.47844-47857.
Owens, D.K., Davidson, K.W., Krist, A.H., Barry, M.J., Cabana, M., Caughey, A.B., Doubeni, C.A., Epling Jr, J.W. and Kubik, M. (2019). Risk Assessment. Genetic Counseling, and Genetic Testing for BRCA-Related Cancer: US Preventive Services Task Force Recommendation Statement. JAMA, 322(7), pp.652-665.
Paltrinieri, N., Comfort, L. and Reniers, G. (2019). Learning about risk: Machine learning for risk assessment. Safety Science, 118, pp.475-486.
Stevenson, M. (2018). Assessing risk assessment in action. Minn. L. Rev., 103, p.303.
Suter II, G.W.(2016). Ecological risk assessment. CRC press.
Zio, E. (2018). The future of risk assessment. Reliability Engineering & System Safety, 177, pp.176-190.
Essay Writing Service Features
Our Experience
No matter how complex your assignment is, we can find the right professional for your specific task. Contact Essay is an essay writing company that hires only the smartest minds to help you with your projects. Our expertise allows us to provide students with high-quality academic writing, editing & proofreading services.
Free Features
Free revision policy
$10Free bibliography & reference
$8Free title page
$8Free formatting
$8How Our Essay Writing Service Works
First, you will need to complete an order form. It's not difficult but, in case there is anything you find not to be clear, you may always call us so that we can guide you through it. On the order form, you will need to include some basic information concerning your order: subject, topic, number of pages, etc. We also encourage our clients to upload any relevant information or sources that will help.
Complete the order form
Once we have all the information and instructions that we need, we select the most suitable writer for your assignment. While everything seems to be clear, the writer, who has complete knowledge of the subject, may need clarification from you. It is at that point that you would receive a call or email from us.
Writer’s assignment
As soon as the writer has finished, it will be delivered both to the website and to your email address so that you will not miss it. If your deadline is close at hand, we will place a call to you to make sure that you receive the paper on time.
Completing the order and download