Abstract-
In this literature review, the topic CAD and CAM materials was the main focus of the review. Throughout the review, a total of four aspects were discussed in relation to the topic. Those aspects include processing, structures, properties and performance. In the performance aspect, different types of scanners, which include the optical scanners, mechanical scanners and IOS scanners. Advantages were also provided for the IOS scanner and design softwares where it was discussed is to how they function and operate. The structures aspects touches on the new hybrid structure which was introduced. The properties aspect mainly touches on the hardness as the mechanical properties and translucency as the optical properties. The performance aspect discusses the CEREC system and see the different components of the system and explain how it operates and functions.
Introduction-
The CAD/CAM process in dentistry describes an unintended restoration which was designed by a computer (Computer Aided Design) and was milled by a computer assisted machine (Computer Aided Machined). The very first system was introduced/launched and developed by Duret and colleagues in 1971, but it was not commonly used because of it’s lack of precision of it’s digitizing, computing power and materials. After 10 years, Mormann and Brandestini invented the CEREC System in Zurich, Switzerland (Rekow 1991). The abbreviation form the system was Ceramic Reconstruction. The system was responsible for the exponential increase in demand of CAD/CAM technology through the industry and the world (Liu 2008).
In the last 20 years of the technology’s existence, new and exciting developments have led to the success of dental CAD and CAM technology. Different methods have been gathered to collect 3D data of the tooth using optical cameras, mechanical cameras and design softwares (Giordano 2006).
Methodology
Keywords Used in Search
Author
Name of Source
Platform
Date Found
Year Published
Cad,cam materials dentistry
F Beuer
Digital dentistry: an overview of recent developments for CAD/CAM generated restorations
Google Scholar
4/9/19
2008
Structure of cad and cam systems in dentistry
T Miyazaki, Y Hotta
CAD/CAM systems available for the fabrication of crown and bridge restorations
Google Scholar
4/9/19
13th May 2011
Properties of cad and cam materials in dentistry
Alhenaki, Aasem Mutlaq
Comparison of mechanical and optical properties between three different CAD/CAM materials
Proquest
7/9/19
2015
Properties of Cad and cam materials in dentistry
Adriana Postiglione Buhrer Samra
CAD/CAM in dentistry – a critical review
Proquest
7/9/19
2016
advantages of optical scanners in dentistry
F, Mangano
Intraoral scanners in dentistry: a review of the current literature
Proquest
7/9/19
2017
Cerec system
Constantiniuc
MANAGEMENT OF PROSTHETIC RESTORATIONS WITH THE CEREC SYSTEM
Proquest
8/9/19
July-September 2014
Structure of cad and cam systems in dentistry
ED Rekow
Dental CAD/CAM Systems
Google Scholar
8/9/19
1991
Structure of cad and cam systems in dentistry
WM Palin
Trends in Indirect Dentistry: 8. CAD/CAM Technology
Google Scholar
8/9/19
June 7th 2017
Cad, cam materials in dentistry
Russel Giordano
Materials for chairside CAD/CAM–produced restorations
Google Scholar
8/9/19
1st September 2006
Cad, cam materials in dentistry
PR Liu
Panorama of dental CAD/CAM restorative systems.
Google Scholar
8/9/19
2008
Body-
Processing- As in many other industries, production stages are increasingly becoming automated in dental technology. Dental restorations which are formed with computer assistance have become even more common in the last couple of years. Many different components, such as scanners and design softwares which have been introduced in the field and they all have a significant purpose to making the dentist’s job easier. The more common scanners which are used are called optical scanners, intraoral 3D scanners and mechanical scanners. (Beuer 2008).
Find Out How UKEssays.com Can Help You!
Our academic experts are ready and waiting to assist with any writing project you may have. From simple essay plans, through to full dissertations, you can guarantee we have a service perfectly matched to your needs.
View our services
There are various types of optical sensors available, which may be used intra and extra-orally. The optical sensor works with an active triangulation process, this is where a sensors captures the patterns of the light and shade which is projected. The receptor of the sensor interprets the changes in depth in the terms of it’s distances, generating a tridimensional image. However, as digitalization of the data is obtained by the reflection of light captured by a PSD sensor (Fig 1), diffusion may interfere in the precision of the digitalized images. This may be minimized, for example, with the help of sprays that must be applied on the surfaces to be copied, especially in the oral cavity (Samra 2016). The need for performing this procedure must be considered in the choice of the data acquisition process.
Intraoral scanners (IOS) are devices for capturing optical impressions in dentistry. They are also similar to other three -dimensional scanners, a light source is projected on to the object that is due to be scanned, in this scenario, it includes prepared teeth and implant scan bodies on the implant, which is used for transferring the 3D implant position (Mangano 2017). The images of the tissues are captured by imaging sensor which are then processed by the software, which then generate point cloud. These clouds are triangulated by the same software which results in a 3D surface model. The surface model of the tissues are the result of the optical impressions (Mangano 2017). The scanner itself offers many advantages, such as time efficiency, elimination of plaster casts and increased and better communication with the technicians.
In several studies which have been conducted in the past, have shown that optical impressions are time-efficient, as they are reducing the working times when they are compared to other conventional impressions. Even though the recent introduction of IOS, with the latest technology that is introduced can complete a full arch scan in less than 3 minutes (Mangano 2017). With normal conventional impressions which can take a full 3-5minutes. This does not seem like a massive difference, but when added throughout the year it is massive.
For the clinician, optical impression allows the removal of a unavoidable step (the convential impression is constructed on the detection of physical impressions and the casting of gypsum models. The exclusion of conventional impression materials results into immediate savings for the clinician which come along with the reduction of consumables costs.
With IOS, the clinician and the dental technician can judge the quality of the impression. After a scan is finished, the dentist can directly email the results to the laboratory and the technician himself can check the results to see if they are accurate. If the technician is not satisfied, he immediately sends an email to the clinician make another one. This happens without any loss of time and without having to call the patient for a different appointment. This also builds and strengthens communication between the clinician and the technician.
In mechanical scanners, the master cast is read mechanically line-by-line by the means of a ruby ball and the three-dimensional structure is then measured. An example of a mechanical scanner in the industry is the Procera Scanner from Nobel Biocare (Samra 2016). This specific type of scanner is established by it’s ability to scan at a high accuracy, this is where the diameter of the ruby ball is set to the smallest grinder which is present in the milling system.
Figure 1- White light projector pattern during the scanning process by an optical scanner
(Beuer 2008)
Design Softwares are mainly provided by the manufacturers for the production and to design various dental restorations. With this type of software being available to dentists, crown and fixed partial dentures frameworks (FDP) can be made (fig 2); some systems also offer the function to design full anatomical crowns, partial crowns, inlays, inlay retained FDPs. The software of CAD/CAM systems presently available on the market is being constantly improved.
Figure 2: Screenshot of CAD-construction of 14 single crown copings
Structures- A new hybrid structure of CAD/CAM porcelain crowns adhered to the CAD/CAM zirconia framework (PAZ) has been proposed (Fig 3). In this system, zirconia frameworks are digitized and porcelain crowns are also fabricated by the CAD/CAM process. Milled porcelain crowns are adhered to zirconia frameworks using adhesive resin cements and the final restoration is completed. Manipulation of the structure is reproducible and reliable without conventional manual porcelain work. Adhesive treatments reinforce the durability of porcelain. Even if porcelain chips, repairing it is easy using the preserved data. (Fig 4 shows a clinical case of the PAZ bridge.)
Fig 3
Figure 4
Properties-
Mechanical properties mainly include it’s hardness. Hardness of a material is defined as the resistance to permanent deformation. The testing for hardness is completed by applying a secure load to an indenter, which then forms a symmetrical shaped indentation on the surface of the material, which is finally then measured by a microscope (Palin 2017). The values of hardness are then calculated using the dimensions of the indentation and the load applied. Overall, there are multiple methods for the testing of hardness of a material (Alhenak 2015). The Vickers hardness is test is more commonly used in the dental. It consists of a 136-degree diamond pyramid-shaped indenter under a standardized force, to produce a square indentation, which are also then are measured under the use of a microscope. Hardness is a vital property when restorative materials are compared. The hardness of the restoration may indicate the level of abrasiveness of a material against the natural dentition. Now, moving on to the next importance property, which are optical properties.
Optical properties which include translucency. Translucency has been characterised as the one of the primary optical characteristics to achieve a good match to a natural tooth structure. (Alhenak 2015). Translucency occurs when light partially spreads or reflects while passing through an object. More the light that passes through the tooth structure, the translucency of the material increases. The translucency of a natural tooth is evident when a noticeable amount of light passes through its incisal and/or proximal aspect due to the presence of a high proportion of enamel compared to the underlying dentin. Now to discuss how the performance of the CEREC system and see the different components of the system and explain how it operates and functions.
Performance-
The CEREC systems starts with an optical impression of the preparation and antagonist teeth. The Optical impression of is captured by an IOS camera, which then sends the image of the prepared teeth right into the software of the system (Constantiniuc 2014). The finished product is the equivalent of the actual clinical situation, which then appears on the screen in a 3D view, which then offers the opportunity to picture the appearance of the dental preparation.
The system is able to detect limits of the preparation, but there is an second option where it is possible for the practitioner to manually keep track off all the limits. The system is also able to plan the occlusion using an algorithm which is based on a biomechanical principle which is similar to natural dentition eruption (Constantiniuc 2014).
Components of the CEREC System- All images/info was found and used here are from (Constantiniuc 2014).
The CEREC system is a modular system which is consisted of two units which is connected Hertzian waves; the first image used is for acquisition (Fig 5) and the second (Fig 6) for the production of dental restoration.
Figure 5
Image Acquisition and Design Component
Figure 6- Milling System
The milling device is equipped with two diamond burrs, which have conical and cylindrical shape. The cylindral diamond burr performs under a jet of water, which results in a speedy and concise modeling of the ceramic block. (Fig 7) The burr allows reproduction of the fine details of occlusal morphology.
Figure 7
Figure 8
Using supportable and biocompatible materials, which is associated with correct dental preparation, with the use of the CEREC systems provides prosthetic repair with superior durability. Primarily, fine- structured feldspathic ceramics were exclusively used, this is due to the material’s mechanical properties which reduces crack propagation. The fedspathic porcelain is then joint together with different manufactured crystals which are processed through the CEREC system. (Fig 8)
Besides fedspathic porcelains, there are a wide range of options to the type of materials available for CAD and CAM materials for dental; zirconium oxide, aluminium, lithium disilicate, synthetic materials, precious and nonprecious alloys. The choice for which material is used, followed by certain requirements that also include the advantages of these materials:
Properties which are similar to those of enamel
Possibility to individualize the hue of the block and to glaze the restoration
Increased strength, far superior or equal to the pressed ceramic
STAGES
To sum the information discussed, the procedure involved for the CEREC system includes two main stages. The first stage mainly consists in the preparation of the surfaces of the tooth, which is then followed by the optical impression of the dental preparation and the antagonist teeth. Finally, also at this stage, the last form of the prosthetic restoration is designed. The second stage consists of milling and refinement of the restoration which is obtained in the first stage. If the working session is split in two stages, the duration of the clinical phase is reduced. In the final and last stage, adhesive fixation is completed by the practitioner, where the final product (tooth) is inserted with the other 14 crowns (Fig 9).
Figure 9.
Conclusion-
To conclude, a total of four aspects were discussed, processing, structure, properties and performance. The processing aspect discussed the different types of scanners, which include the optical scanners, mechanical scanners and IOS scanners. The structures aspects touches on the new hybrid structure which was introduced. The properties aspect mainly touches on the hardness as the mechanical properties and translucency as the optical properties. The performance aspect discusses the CEREC system and see the different components of the system
References
Palin, W.M. and Burke, F.J.T., 2005. Trends in indirect dentistry: 8. CAD/CAM technology. Dental update, 32(10), pp.566-572.
Giordano, R., 2006. Materials for chairside CAD/CAM–produced restorations. The Journal of the American Dental Association, 137, pp.14S-21S.
Liu, P.R. and Essig, M.E., 2008. Panorama of dental CAD/CAM restorative systems. Compendium of continuing education in dentistry (Jamesburg, NJ: 1995), 29(8), pp.482-484.
Rekow, E.D., 1991. Dental CAD/CAM systems. JADA, 122(12), pp.43-48.
Beuer, F., Schweiger, J. and Edelhoff, D., 2008. Digital dentistry: an overview of recent developments for CAD/CAM generated restorations. British dental journal, 204(9), p.505.
Miyazaki, T. and Hotta, Y., 2011. CAD/CAM systems available for the fabrication of crown and bridge restorations. Australian dental journal, 56, pp.97-106.
Constantiniuc, M 2014, ‘MANAGEMENT OF PROSTHETIC RESTORATIONS WITH THE CEREC SYSTEM’, Prosthetic Dentistry, vol. 4, no. 3, p. 8.
Mangano, F., Gandolfi, A., Luongo, G. and Logozzo, S. (2017). Intraoral scanners in dentistry: a review of the current literature. BMC Oral Health, 17(1).
Buhrer Samra, A.P., Morais, E., Mazur, R.F., Vieira, S.R. and Rached, R.N. (2016). CAD/CAM in dentistry – a critical review. Revista Odonto Ciência, 31(3), p.140.
Alhenaki, A.M. (2015). COMPARISON OF MECHANICAL AND OPTICAL PROPERTIES BETWEEN THREE DIFFERENT CAD/CAM MATERIALS. NOVA SOUTHEASTERN UNIVERSITY, [online] 1(1), p.101.Available http://search.proquest.com.libraryproxy.griffith.edu.au/docview/1701975564?accountid=14543.
Essay Writing Service Features
Our Experience
No matter how complex your assignment is, we can find the right professional for your specific task. Contact Essay is an essay writing company that hires only the smartest minds to help you with your projects. Our expertise allows us to provide students with high-quality academic writing, editing & proofreading services.
Free Features
Free revision policy
$10Free bibliography & reference
$8Free title page
$8Free formatting
$8How Our Essay Writing Service Works
First, you will need to complete an order form. It's not difficult but, in case there is anything you find not to be clear, you may always call us so that we can guide you through it. On the order form, you will need to include some basic information concerning your order: subject, topic, number of pages, etc. We also encourage our clients to upload any relevant information or sources that will help.
Complete the order form
Once we have all the information and instructions that we need, we select the most suitable writer for your assignment. While everything seems to be clear, the writer, who has complete knowledge of the subject, may need clarification from you. It is at that point that you would receive a call or email from us.
Writer’s assignment
As soon as the writer has finished, it will be delivered both to the website and to your email address so that you will not miss it. If your deadline is close at hand, we will place a call to you to make sure that you receive the paper on time.
Completing the order and download