Call centers serve a significant role when it comes to the daily operations of utility, financial as well as technology companies besides public bodies. Reliable and relevant information is needed among the workers in the call centers on the levels of risks as well as the hazards associated with the working environment.
General sources of sound in the space and their frequency ranges
The main source of sound in the space is the air supply at the lighting fixture that is located in the ceiling of the working place. The noises from the air supply fixture which finally get to the workers in the working place are composed of:
Room acoustics in terms of sound absorption and reflection, and the characteristics of internal finishes
Reflection of sound waves takes place in the same manner as those of light waves with the angle of incidence being equal to the angle of reflection (Moeller, 2016). Among the properties of reflection of sound include:
Upon the reflection of sound from a flat surface, there is formation of special shape by the wave fronts and the center of curvature tends to be the source of sound
Sound waves become magnified when reflected from a convex surface and hence tending to be thinner and weaker. Convex surfaces can thus be used in the reduction of the impact of sound in the interior spaces. Sound is amplified when reflected from a concave surface as they are dense and compressed. Curved surfaces should thus be avoided in the interior surfaces since the results are not desirable (Postma, Jouan and Katz, 2018). Some of the sound that strikes a surface is absorbed by friction and materials which absorb sound are known as absorbents. Absorption in the call center occurs through three main ways:
Air: Such absorption occurs as a result of friction between any two molecules in as much as it is very small.
Audience: Clothes serve as absorbents. In the call center, sound absorption takes place through the clothes of the people working inside. The higher the number of people working in the call center the greater the absorption that occurs (Moeller, 2016)
Furniture and furnishing: Materials used in the finishing and furnishing of the building are capable of absorbing sound for example the curtains and carpets.
Reverberation time defines the amount of how much taken is take for sound to undergo decay in a space and this property has the ability to influence how well a speech is understood and even change the way voices sound. The speech transferred across a room by an individual is not always received at the position of listening as an exact reproduce of the initial signal. There is no only an additional of the background noise but also distortion of the signal by the reverberant as well as reflective features of the room (Reinten, Braat-Eggen, Hornikx, Kort and Kohlrausch, 2017). In most cases, a direct consequence of such distractions is lowering of the intelligibility speech.
The speakers of the room are in most cases adapting their speech in such a way that they suit the room. This is attained through talking slowly in a room perceived to be very reverberant or in a room that has dead-spots.
Through specifying the quantity of speech intelligibility and taking its measurement within a room, the degree of acoustical treatment in needed in the solution of such changes is established. Among the main approaches that can be used in the enhancement of the clarity of speech include: reduction of reverberation time in the rooms used for meeting, reinforcement of sound in the room, reducing reverberation time in the meetings that are used for meeting as well as the prevention of echoes in voluminous enclosures (Postma, Jouan and Katz, 2018).
Among the features perceived to be of importance with regards to the acoustical comfort are as described:
The most significant sources of noise in the space include air supply fixture, office equipment and telephone signals. There is not significant noise coming from the outside or from the other sections of the building.
Over 30 measurement points were chosen considering the seating plan. The measurement of the levels of noise were taken twice a day since the number of personnel serving in the call center and once the major sources of noise do not undergo any alterations in the course of the day (Osses, Kohlrausch, Lachenmayr and Mommertz, 2017). Besides the equivalent continuous noise level, determination was also done on the statistical levels. The findings are as shown in the figures below
The noise levels can be significantly reduced for the neighbouring personnel by making adjustments to separators that are used on the tables which would be experienced. This will go hand in hand with increasing the heights of the separators as well as changing their shapes in order to generate better acoustical shadow. Such a simple modification may be attained by joining an extension board to each of separators which have a congruent inverse slope. While this modification would result in enhanced sound adoption effectiveness of the separators, it would result in visual connection loss for the personnel and hence it would be recommendable to use separators that are made of glass for the case of the working personnel (Moeller, 2016).
Each of the sides of the tables may as well be enclosed using turn-rounds that are sound absorbent and are linked to separators to enhance effectiveness of such barriers. The total absorption of the place may be attained through lowering the boards to the ground surface. Such modifications are predicted to be able to decrease the levels of sound by about 10 dB
Enhancing quantity of absorption of sound that cover on walls as well as ceiling could be another strategy for reducing the sound levels in the call center (Dunne, 2019). The sound absorbing features of internal surfaces of call center are established at various stages. Among the main recommendations include:
The levels of noise or sound in the open plan spaces may be lowered through the introduction of barriers which will serve to lower direct sounds as they form acoustic shadows. Should the barriers be made sound absorbing, they will be able to lower reverberant sound as well as reflected sound (Vervoort and Vercammen, 2015). The placement of the barriers at the correct positions in the call center would serve as one of the most effective ways of attenuation of direct and indirect sound between the personnel.
The quality of the working space can be enhanced by reducing the number of the staff that works in the call center. This would serve to enhance the acoustical quality of the space as there will be a significant reduction in sources of noise which include both people as well as phone signals. Modifications to the telephone equipment may as well be conducted in order to achieve a further reduction in the levels of sound (Dehlbæk, Brunskog, Petersen and Marie, 2016).
References
Dehlbæk, T.S., Brunskog, J., Petersen, C.M. and Marie, P., 2016, August. The effect of human activity noise on the acoustic quality in open plan offices. In INTER-NOISE and NOISE-CON Congress and Conference Proceedings (Vol. 253, No. 4, pp. 4117-4126). Institute of Noise Control Engineering
Dunne, J., 2019, March. Room & Architectural Acoustics-A New Approach to the Design & Delivery of Critical Acoustic Facilities. In Audio Engineering Society Convention 146. Audio Engineering Society
Le Muet, Y. and Chevret, P., 2015. Acoustics of Open Spaces–Towards a New French Standard. Euronoise 2015, pp.1192-1196
Le Muet, Y., 2012, April. Acoustic of open spaces-Overview of standardization work. In Acoustics 2012
Moeller, N., 2016. Acoustic Privacy within the Built Environment. Architect, 105(10), pp.82-85
Osses Vecchi, A., Kohlrausch, A., Lachenmayr, W. and Mommertz, E., 2017. Predicting the perceived reverberation in different room acoustic environments using a binaural auditory model. The Journal of the Acoustical Society of America, 141(4), pp.EL381-EL387
Petersen, C.M. and Rasmussen, B., 2018. Acoustic design of open-plan offices and comparison of requirements in the Nordic countries. In Baltic-Nordic Acoustics Meeting 2018 (pp. 1-8). Nordic Acoustic Association
Postma, B.N., Jouan, S. and Katz, B.F., 2018. Pre-Sabine room acoustic design guidelines based on human voice directivity. The Journal of the Acoustical Society of America, 143(4), pp.2428-2437
Reinten, J., Braat-Eggen, P.E., Hornikx, M., Kort, H.S. and Kohlrausch, A., 2017. The indoor sound environment and human task performance: A literature review on the role of room acoustics. Building and Environment, 123, pp.315-332
Vervoort, T. and Vercammen, M., 2015. Background noise level to determine the speech privacy in open plan offices. Proceedings of Euronoise, Maastricht, The Netherlands, pp.1209-1214
Essay Writing Service Features
Our Experience
No matter how complex your assignment is, we can find the right professional for your specific task. Contact Essay is an essay writing company that hires only the smartest minds to help you with your projects. Our expertise allows us to provide students with high-quality academic writing, editing & proofreading services.Free Features
Free revision policy
$10Free bibliography & reference
$8Free title page
$8Free formatting
$8How Our Essay Writing Service Works
First, you will need to complete an order form. It's not difficult but, in case there is anything you find not to be clear, you may always call us so that we can guide you through it. On the order form, you will need to include some basic information concerning your order: subject, topic, number of pages, etc. We also encourage our clients to upload any relevant information or sources that will help.
Complete the order formOnce we have all the information and instructions that we need, we select the most suitable writer for your assignment. While everything seems to be clear, the writer, who has complete knowledge of the subject, may need clarification from you. It is at that point that you would receive a call or email from us.
Writer’s assignmentAs soon as the writer has finished, it will be delivered both to the website and to your email address so that you will not miss it. If your deadline is close at hand, we will place a call to you to make sure that you receive the paper on time.
Completing the order and download