1. Network Diagram of the local area network
2. Site Map shows the deployment location
3. Detailed network inventory list
3.1. Required Network Device
|
Qty |
Hardware |
Maximum |
Minimum |
Minimum Total |
Maximum Total |
|
16 |
Cisco Catalyst 2960 24 Port Layer 3 switch. |
$8,333.00 |
$7,943.00 |
$ 127,088.00 |
$ 133,328.00 |
|
6 |
Cisco Catalyst 2620 Series Router. |
$8,900.00 |
$8,500.00 |
$ 51,000.00 |
$ 53,400.00 |
|
5 |
Samsung Laser Printers |
921 |
312 |
$ 1,560.00 |
$ 4,605.00 |
3.2. Required Network Cables
|
Cable Type |
Cost |
|
Cat 5 |
250’ for $23.99 |
|
Cat 6 |
250’ for $32.28 |
|
Cat 7 |
250’ for $94.88 |
|
Optical Fiber |
250’ for $50.00 |
3.3. Other Devices and Accessories
|
Qty |
Hardware |
Maximum |
Minimum |
Minimum Total |
Maximum Total |
|
2 |
Lacie 2 TB 10/100/1000 Back-up Device |
659 |
659 |
$ 1,318.00 |
$ 1,318.00 |
|
2 |
APC Back UPS RS |
495 |
202 |
$ 404.00 |
$ 990.00 |
|
20 |
Netgear WG302 Managed Wireless Access Point |
331 |
331 |
$ 6,620.00 |
$ 6,620.00 |
|
36 |
Netgear GS108 Switch 8-port |
159 |
159 |
$ 5,724.00 |
$ 5,724.00 |
4. IP addressing Plan
Major Network: 10.103.100.0/23
Available IP addresses in major network: 1022
Number of IP addresses needed: 348
Available IP addresses in allocated subnets: 502
About 52% of available major network address space is used
About 69% of subnetted network address space is used
|
Subnet Name |
Needed Size |
Allocated Size |
Address |
Mask |
Dec Mask |
Assignable Range |
Broadcast |
|
Network |
2 |
2 |
10.103.102.16 |
/30 |
255.255.255.252 |
10.103.102.17 – 10.103.102.18 |
10.103.102.19 |
|
LAB_Network |
11 |
14 |
10.103.102.0 |
/28 |
255.255.255.240 |
10.103.102.1 – 10.103.102.14 |
10.103.102.15 |
|
Office_Network |
23 |
30 |
10.103.100.128 |
/27 |
255.255.255.224 |
10.103.100.129 – 10.103.100.158 |
10.103.100.159 |
|
LAB_1 |
20 |
30 |
10.103.100.160 |
/27 |
255.255.255.224 |
10.103.100.161 – 10.103.100.190 |
10.103.100.191 |
|
LAB_2 |
20 |
30 |
10.103.101.0 |
/27 |
255.255.255.224 |
10.103.101.1 – 10.103.101.30 |
10.103.101.31 |
|
LAB_3 |
20 |
30 |
10.103.101.32 |
/27 |
255.255.255.224 |
10.103.101.33 – 10.103.101.62 |
10.103.101.63 |
|
LAB_4 |
20 |
30 |
10.103.101.64 |
/27 |
255.255.255.224 |
10.103.101.65 – 10.103.101.94 |
10.103.101.95 |
|
LAB_5 |
20 |
30 |
10.103.101.96 |
/27 |
255.255.255.224 |
10.103.101.97 – 10.103.101.126 |
10.103.101.127 |
|
LAB_6 |
20 |
30 |
10.103.101.128 |
/27 |
255.255.255.224 |
10.103.101.129 – 10.103.101.158 |
10.103.101.159 |
|
LAB_7 |
20 |
30 |
10.103.101.160 |
/27 |
255.255.255.224 |
10.103.101.161 – 10.103.101.190 |
10.103.101.191 |
|
LAB_8 |
20 |
30 |
10.103.101.192 |
/27 |
255.255.255.224 |
10.103.101.193 – 10.103.101.222 |
10.103.101.223 |
|
LAB_9 |
20 |
30 |
10.103.101.224 |
/27 |
255.255.255.224 |
10.103.101.225 – 10.103.101.254 |
10.103.101.255 |
|
LAB_10 |
20 |
30 |
10.103.100.192 |
/27 |
255.255.255.224 |
10.103.100.193 – 10.103.100.222 |
10.103.100.223 |
|
LAB_11 |
20 |
30 |
10.103.100.224 |
/27 |
255.255.255.224 |
10.103.100.225 – 10.103.100.254 |
10.103.100.255 |
|
Network_Office |
92 |
126 |
10.103.100.0 |
/25 |
255.255.255.128 |
10.103.100.1 – 10.103.100.126 |
10.103.100.127 |
Configuration Document
1. Detailed configuration Commands for all routers and switches
University Router
Router>
Router>
Router>en
Router#config t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname UniversityRouter
UniversityRouter(config)#
UniversityRouter(config-if)#ip address 130.150.122.190 255.255.0.0
UniversityRouter(config-if)#no shut
UniversityRouter(config-if)#exit
LAB_Router
Router>
Router>en
Router#config t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname LAB_Router
LAB_Router(config)#int fa 0/0
LAB_Router(config-if)#ip address 10.103.102.17 255.255.255.252
LAB_Router(config-if)#no shut
LAB_Router(config-if)#exit
LAB_Router(config)#
LAB_Router(config)#int fa 0/1
LAB_Router(config-if)#ip address 10.103.102.14 255.255.255.240
LAB_Router(config-if)#no shut
LAB_Router(config-if)#exit
LAB_Router(config)#
LAB_1 Router
Router>
Router>en
Router#config t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname LAB_1
LAB_1(config)#int fa 0/0
LAB_1(config-if)#ip address 10.103.100.161255.255.255.224
LAB_1(config-if)#no shut
LAB_1(config-if)#exit
LAB_1(config)#
LAB_1(config)#int fa 0/1
LAB_1(config-if)#ip address 10.103.102.1 255.255.255.240
LAB_1(config-if)#no shut
LAB_1(config-if)#exit
LAB_1(config)#
LAB_2 Router
Router>
Router>en
Router#config t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname LAB_2
LAB_2(config)#int fa 0/0
LAB_2(config-if)#ip address 10.103.101.1 255.255.255.224
LAB_2(config-if)#no shut
LAB_2(config-if)#exit
LAB_2(config)#
LAB_2(config)#int fa 0/1
LAB_2(config-if)#ip address 10.103.102.2 255.255.255.240
LAB_2(config-if)#no shut
LAB_2(config-if)#exit
LAB_2(config)#
LAB_3 Router
Router>
Router>en
Router#config t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname LAB_3
LAB_3(config)#int fa 0/0
LAB_3(config-if)#ip address 10.103.101.33 255.255.255.224
LAB_3(config-if)#no shut
LAB_3(config-if)#exit
LAB_3(config)#
LAB_3(config)#int fa 0/1
LAB_3(config-if)#ip address 10.103.102.3 255.255.255.240
LAB_3(config-if)#no shut
LAB_3(config-if)#exit
LAB_3(config)#
LAB_4 Router
Router>
Router>en
Router#config t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname LAB_4
LAB_4(config)#int fa 0/0
LAB_4(config-if)#ip address 10.103.101.65 255.255.255.224
LAB_4(config-if)#no shut
LAB_4(config-if)#exit
LAB_4(config)#
LAB_4(config)#int fa 0/1
LAB_4(config-if)#ip address 10.103.102.4 255.255.255.240
LAB_4(config-if)#no shut
LAB_4(config-if)#exit
LAB_4(config)#
LAB_5 Router
Router>
Router>en
Router#config t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname LAB_5
LAB_5(config)#int fa 0/0
LAB_5(config-if)#ip address 10.103.101.97 255.255.255.224
LAB_5(config-if)#no shut
LAB_5(config-if)#exit
LAB_5(config)#
LAB_5(config)#int fa 0/1
LAB_5(config-if)#ip address 10.103.102.5 255.255.255.240
LAB_5(config-if)#no shut
LAB_5(config-if)#exit
LAB_5(config)#
LAB_6 Router
Router>
Router>en
Router#config t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname LAB_6
LAB_6(config)#int fa 0/0
LAB_6(config-if)#ip address 10.103.102.6 255.255.255.240
LAB_6(config-if)#no shut
LAB_6(config-if)#exit
LAB_6(config)#
LAB_6(config)#int fa 0/1
LAB_6(config-if)#ip address 10.103.101.129 255.255.255.224
LAB_6(config-if)#no shut
LAB_6(config-if)#exit
LAB_6(config)#
LAB_7 Router
Router>
Router>en
Router#config t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname LAB_7
LAB_7(config)#int fa 0/0
LAB_7(config-if)#ip address 10.103.102.7 255.255.255.240
LAB_7(config-if)#no shut
LAB_7(config-if)#exit
LAB_7(config)#
LAB_7(config)#int fa 0/1
LAB_7(config-if)#ip address 10.103.101.161 255.255.255.224
LAB_7(config-if)#no shut
LAB_7(config-if)#exit
LAB_7(config)#
LAB_8 Router
Router>
Router>en
Router#config t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname LAB_8
LAB_8(config)#int fa 0/0
LAB_8(config-if)#ip address 10.103.102.8 255.255.255.240
LAB_8(config-if)#no shut
LAB_8(config-if)#exit
LAB_8(config)#
LAB_8(config)#int fa 0/1
LAB_8(config-if)#ip address 10.103.101.193 255.255.255.224
LAB_8(config-if)#no shut
LAB_8(config-if)#exit
LAB_8(config)#
LAB_9 Router
Router>
Router>en
Router#config t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname LAB_9
LAB_9(config)#int fa 0/0
LAB_9(config-if)#ip address 10.103.102.9 255.255.255.240
LAB_9(config-if)#no shut
LAB_9(config-if)#exit
LAB_9(config)#
LAB_9(config)#int fa 0/1
LAB_9(config-if)#ip address 10.103.101.225 255.255.255.224
LAB_9(config-if)#no shut
LAB_9(config-if)#exit
LAB_9(config)#
LAB_10 Router
Router>
Router>en
Router#config t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname LAB_10
LAB_10(config)#int fa 0/0
LAB_10(config-if)#ip address 10.103.102.10 255.255.255.240
LAB_10(config-if)#no shut
LAB_10(config-if)#exit
LAB_10(config)#
LAB_10(config)#int fa 0/1
LAB_10(config-if)#ip address 10.103.100.193 255.255.255.224
LAB_10(config-if)#no shut
LAB_10(config-if)#exit
LAB_10(config)#
LAB_11 Router
Router>
Router>en
Router#config t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname LAB_11
LAB_11(config)#int fa 0/0
LAB_11(config-if)#ip address 10.103.102.11 255.255.255.240
LAB_11(config-if)#no shut
LAB_11(config-if)#exit
LAB_11(config)#
LAB_11(config)#int fa 0/1
LAB_11(config-if)#ip address 10.103.100.225 255.255.255.224
LAB_11(config-if)#no shut
LAB_11(config-if)#exit
LAB_11(config)#
Office_Router
Router>
Router>enable
Router#config t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname Office_Router
Office_Router(config)#int fa0/0
Office_Router(config-if)#ip address 10.103.102.18 255.255.255.252
Office_Router(config-if)#no shut
Office_Router(config-if)#exit
Office_Router(config)#
Office_Router(config)#int fa 0/1
Office_Router(config-if)#ip address 10.103.100.1 255.255.255.128
Office_Router(config-if)#no shut
Office_Router(config-if)#exit
2. Screenshots from the Packet Tracer File
Alani, M. M. (2017). Guide to Cisco Routers Configuration: Becoming a Router Geek. Springer.
Biswas, A. K. (2017). Source authentication techniques for network-on-chip router configuration packets. ACM Journal on Emerging Technologies in Computing Systems (JETC), 13(2), 28.
Kado, Y., Shichijo, D., Deguchi, I., Iwama, N., Kasashima, R., & Wada, K. (2015, November). Power flow control of three-way isolated DC/DC converter for Y-configuration power router. In Future Energy Electronics Conference (IFEEC), 2015 IEEE 2nd International (pp. 1-5). IEEE.
Mayoral, A., López, V., Gerstel, O., Palkopoulou, E., de Dios, Ó. G., & Fernández-Palacios, J. P. (2015). Minimizing resource protection in IP over WDM networks: Multi-layer shared backup router. Journal of Optical Communications and Networking, 7(3), A440-A446.
Essay Writing Service Features
Our Experience
No matter how complex your assignment is, we can find the right professional for your specific task. Contact Essay is an essay writing company that hires only the smartest minds to help you with your projects. Our expertise allows us to provide students with high-quality academic writing, editing & proofreading services.
Free Features
Free revision policy
$10Free bibliography & reference
$8Free title page
$8Free formatting
$8How Our Essay Writing Service Works
First, you will need to complete an order form. It's not difficult but, in case there is anything you find not to be clear, you may always call us so that we can guide you through it. On the order form, you will need to include some basic information concerning your order: subject, topic, number of pages, etc. We also encourage our clients to upload any relevant information or sources that will help.
Complete the order form
Once we have all the information and instructions that we need, we select the most suitable writer for your assignment. While everything seems to be clear, the writer, who has complete knowledge of the subject, may need clarification from you. It is at that point that you would receive a call or email from us.
Writer’s assignment
As soon as the writer has finished, it will be delivered both to the website and to your email address so that you will not miss it. If your deadline is close at hand, we will place a call to you to make sure that you receive the paper on time.
Completing the order and download
