A.M. Design & Construction Group is one of the premier homebuilder of Louisiana. A.M. Design & Construction Group is advanced and service-oriented Design or Build contractor, serving the great Lafayette field for Twenty-two years. In July 2015, A.M. Design & Construction Group breached the safety and health regulation. In this report, the case of Director of public prosecutions v Am design and construction Pty ltd & Aldo Ditonto is discussed and critically examined. This report assesses the fine imposed on A.M. Design & Construction Group to breach the safety and health regulations. In the following parts, various Common law criteria are applied to whether the defendant will be the guilty of negligence (Ross, 2018).
Following are the issues in the given case study-
In Australia, Tort law contains the common law as well as, to the less extent, legislature. The tort is the civil wrong, other than the breach of contract. Torts may be prosecuted on by private individual in against of other private individual or state to accurate the forms of actions or wrong. There are various torts are existed, and they normally originate the legal status from a common law. Since the court may describe the present tort or even identify the new ones by the common law, tort law is considered as boundless and flexible to the new situations (Cooper, 2018). Negligence is described as a breach of the duty of care that one person owes to other person that results in other individual getting harm or injury. To prove the negligence, it is required by the aggrieved party to state that the duty of care was owed that was not fulfilled and that resulted in the injured people being injured and harmed. Apart from it, it is required to state that the harm which resulted from a negligence of the other people, that there was proper foreseeability of these damages taking place and at last, the loss or an injury was not too remote to cancel the chance of the claims being awarded. Moreover, in the case where a person is professional or that person market himself as the individual with the particular skillsets, then in case the client is entitled to the standard of care. In different terms, it is expected by the client to assist him, not hurt him or others. In a case where expectations are not fulfilled, that is called professional negligence. The breach may harm the work caused, however this can also be the clerical oversights. Negligence, in some cases, can be considered a breach of contract.
As per the criminal Code Act 1995, the people are reckless in relation to the situation if:
Additionally, The Work Health and Safety Law (WHS laws) in Australia (Review) has given the complete tick of a permission for the operations or functions of the safety laws, along with the recommendation’s series to help to deliver the clarity, reliability and proper operation or function and implementation of the law. It is required by the professional to comply with The Occupational Health and Safety Act 2004 for the better security the health, protection, and well-being of the workers and other person at workplace (Fox, 2017). The professional should comply with the provisions of this Act, to end, at the sources, risk to health, security, or well-being of the workers and other people at workplace (Ben-Shahar and Porat, 2016).
In the addition of this, the contractor is liable for inadequately secured work structure. The judgement given by the magistrate court of Victoria has state the requirement for employer to look for engineering solutions while the risks state such the control is required. In case of Worksafe Victoria v DWI Pty Ltd (2019), DWI Pty Ltd (the Company), the facts ineffectively appealed against the principle for failure of hording they had connected that harmed people in year 2015. In March 2015, an entity, the producer and installer of hoardings, installed hoardings at the shopping mall in Victoria, assigning the hoardings to the partition at opposite of this site. Though, to permit more room for a work, the hoarding later had to be stimulated further out from sites. The hoarding was later moved out and, as the bulkhead was being demolished, the Company instead attached the hoarding to the ceiling with a wooden brace. No engineering control was applied to the deal with a wind shaft and a hoarding later misshapen inward in a shopping mall, harming public people and causing the damages to display and more shop (Coenen, et. al, 2017).
In this case, it was held by the court that it is suggested by the expert report that the risks must be in control by the engineering solution, with the proper documentation that properly stated and responsible for, the particular of hoardings and the related airstream loading. The company was found as guilty. It was offended by Magistrate Court of Victoria. The Magistrate Court of Victoria imposed the fine of sixty thousand dollars over the corporation. The Victorian Magistrate Court gave the order to make the payment of cost of eighteen thousand two hundred seventeen. The appeal was filed by the company. However, this appeal was dismissed by the court. In this way, it is required that the employer are required to be attentive to handle the situation and manage the possible impact of change or new development to the process of how work structure is installed to make sure this does not enhance the risks of harm to other field of sites. It is required that employer must also make sure that the workers consider all possible paths of risks, and the appropriateness of the work to endure this risk (McInnes, et. al, 2017).
In the case of an issue of what constitutes ‘reckless behaviour’, as different from sheer ‘negligence’, was the significant element in decreasing the penalties levied on the organisational engineering corporation and the sole director. Aldo DiTonto was the structural engineer of AM Design & Construction Pty Ltd. Aldo DiTonto was also the sole owner and sole secretory of the Company (Brown, 2016). Aldo DiTonto made the structural drawing for the basement mine work for the combined residential development and commercial development. Aldo DiTonto had failed to involve in the structural drawing for a development of the simultaneous connection of a site-holding scheme. On 13 July or 14 July 2015, the part of the mine distorted in southeast corners of developed site. Further, at the night of 15 July 2015, the one more downfall or breakdown took place. It was advised by the police that residents of front townhouse should evacuated on the immediate basis. The company as well as Aldo DiTonto appealed guilty to charges for violating the health and safety law, being the failure of this corporation to make sure the safety of other person. Aldo DiTonto was charged as being the officer of corporation to whom infringement or violation was attributable to the failure to have proper care. The company A.M. Design & Construction Group and engineer Aldo Ditonto were not complied with the Work Health and Safety Law (WHS laws) in Australia (Review).
It was noted by sentencing judge that there was the serious risk that people in a locality of the excavation mine can be seriously harmed or killed by being overcame in the failure of the pit, or falling in the mine. The penalty of 380,000 $ was levied on the corporation and the penalty of 100,000 $ imposed on Aldo DiTonto (Tonso, et. al, 2016). In this way, the total penalty of 4,80,000 $ was levied on the company and Aldo Ditonto. The Aldo Ditonto and company have made the appealed the penalties on a ground that they were noticeably unnecessary. In this way, the company and Aldo DiTonto were decreased by half (Zimmerman, 2018).
In this case, the company and Aldo DiTonto had been negligent as per the rule of negligence mentioned above (Campbell, 2016). In this case, the duty of care was not fulfilled by Aldo DiTonto and company, and that resulted in the injured people being harmed. In this matter, the conduct did not involve the element of recklessness (Resnik, et.al, 2017). Aldo DiTonto did not comply with provisions of The Occupational Health and Safety Act 2004. In this case, an argument can be made that the penalties levied in this case, specifically while considered aggregately, were completely out of the range correctly open to a sentencing judge. For these complainants the offending, severe as this unquestionably was, did not worth the penalties of the extent. One point can be made that guilt and responsibilities of Aldo DiTonto were to be evaluated on a ground that Aldo DiTonto as a minimum did the best to make sure that the possibly close by the pit for that structural drawings were made, were not discovered to the risks. In this context, Aldo DiTonto was negligent, instead of reckless. Furthermore, when regard is had to present practices of sentencing for the crimes of this category, this can willingly be seen that these penalties appear to be out of kilter (Furci and Sunindijo, 2018).
Conclusion
As per the above analysis, it can be concluded that the Professional negligence is a failure of the practised person to have appropriate care while functioning with the clients. Fundamentally, the client expects professional to see how to keep the client away from bodily harm, commercial harm, and mental harm in respect of the professional relations. In case where the professional falls short, then he can be charged of violating the obligation of care. It is a duty of professional to perform properly for the circumstances. Though, the duty of care can weigh the little substantial in the life of professional (Hanley and O’Rourke, 2016). This is partly because the relations with the clients normally make the duties clear in the courts. The professional is the person with the proper knowledge and understanding. In this way, it is required by the client to suppose the professional level of services from the professionals. However, the other apprehension is the image. The persons take the services from the professional on the basis of belief that he may get the job done. The professional negligence lawsuit may damage the good name and the businesses (Boister, 2018). This is smart to ignore them. In the given case of Director of public prosecutions v Am design and construction Pty ltd & Aldo Ditonto, Aldo DiTonto was negligent because he did not fulfil the duty of care (Friend and Kohn, 2018). The conduct of Aldo DiTonto involves the higher risk that the physical factor presents or would present. This conduct merits the criminal punishment for the crime. Aldo DiTonto violated the provisions of Work Health and Safety Law (WHS laws).
References
Ben-Shahar, O. and Porat, A. (2016) Personalizing Negligence Law. NYUL Rev., 91, p.627.
Boister, N. (2018) An introduction to transnational criminal law. Oxford University Press.
Brown, A.H. (2016) Recklessness: a billion dollar question. Loyola Maritime Law Journal, 15(2), pp.279-314.
Campbell, T. (2016) The obligations and risks imposed on directors by workplace laws. Governance Directions, 68(9), p.530.
Coenen, P., Gilson, N., Healy, G.N., Dunstan, D.W. and Straker, L.M. (2017) A qualitative review of existing national and international occupational safety and health policies relating to occupational sedentary behaviour. Applied ergonomics, 60, pp.320-333.
Cooper, C. (2018) Industrial Manslaughter Laws. Oxford: Oxford University press
Fox, D. (2017) Reproductive Negligence. Colum. L. Rev., 117, p.149.
Friend, M. A. and Kohn, J.P. (2018) Fundamentals of occupational safety and health. USA: Rowman & Littlefield.
Furci, J. and Sunindijo, R.Y. (2018) Impacts of the WHS Act 2011 on safety management in small and medium construction companies. International Journal of Construction Management, pp.1-11.
Hanley, G.M. and O’Rourke, A. (2016) The race without a finishing line: legislative means for confronting bullying in the Australian workplace. Asia Pacific Journal of Human Resources, 54(3), pp.352-368.
McInnes, J.A., MacFarlane, E.M., Sim, M.R. and Smith, P. (2017) Working in hot weather: a review of policies and guidelines to minimise the risk of harm to Australian workers. Injury prevention, 23(5), pp.334-339.
Resnik, D.B., Smith, E.M., Chen, S.H. and Goller, C. (2017) What is recklessness in scientific research? The Frank Sauer case. Accountability in research, 24(8), pp.497-502.
Ross, A. (2018) Workplace law: Recklessness leads to landmark WHS prosecution $900 K fine for NSW category one offence. Proctor, The, 38(5), p.36.
Tonso, M.A., Prematunga, R.K., Norris, S.J., Williams, L., Sands, N. and Elsom, S.J. (2016) Workplace violence in mental health: A Victorian mental health workforce survey. International journal of mental health nursing, 25(5), pp.444-451.
Zimmerman, M.J. (2018) Recklessness, Willful Ignorance, and Exculpation. Criminal Law and Philosophy, 12(2), pp.327-339.
Essay Writing Service Features
Our Experience
No matter how complex your assignment is, we can find the right professional for your specific task. Contact Essay is an essay writing company that hires only the smartest minds to help you with your projects. Our expertise allows us to provide students with high-quality academic writing, editing & proofreading services.
Free Features
Free revision policy
$10Free bibliography & reference
$8Free title page
$8Free formatting
$8How Our Essay Writing Service Works
First, you will need to complete an order form. It's not difficult but, in case there is anything you find not to be clear, you may always call us so that we can guide you through it. On the order form, you will need to include some basic information concerning your order: subject, topic, number of pages, etc. We also encourage our clients to upload any relevant information or sources that will help.
Complete the order form
Once we have all the information and instructions that we need, we select the most suitable writer for your assignment. While everything seems to be clear, the writer, who has complete knowledge of the subject, may need clarification from you. It is at that point that you would receive a call or email from us.
Writer’s assignment
As soon as the writer has finished, it will be delivered both to the website and to your email address so that you will not miss it. If your deadline is close at hand, we will place a call to you to make sure that you receive the paper on time.
Completing the order and download