Discuss About The Engineering Construction Facile Management.
In such cases, the possible set of liabilities comes from statutory, tort and contract laws. Each of these measures may come into play based on how well the related parties want to pursue such matter. Statutory liability is one of the forms of liabilities that come into the existence when statute supplies the liability of one man to the other at the time when there is no basis for the liability.
On the other hand, contractual liability comes from breaching of the contract. There must be a contract present in between both the two parties. Furthermore, because of the nature of that very contract, it will describe the list of liabilities that an engineer may confront to or face. However, in order to form a contract breach in true terms, a person (engineer) must be a part of the contract itself or has to be a part of any of the party to the contract. This will help the engineer to avoid personal liabilities, as they are not noted in a contract.
The tort law determines and describes the limit of personal liability for the engineers. It describes the components, particularly of negligence claim. However, there are few couple of claims that a person can make in the law. They include – battery, Negligence claims and assault among the others. The engineers are possibly to face the charges of reduced professionalism and malpractice. The person who takes an engineer to the court because of the negligence of duty must satisfy few requirements and they are – Causation, Duty, Damages, as well as breach of the standards of care. However, this particular case describes the possibility of the firm for being sued due to the damages that are done. Furthermore, the most possible approach is to seek
Contractual obligation mainly comes from the discussions about the doctrine of privity (Spiers et al., 2015). The doctrine of privity determined the limit of a professional’s liability which would be very limited by the employment contract. In this case, doctrine of privity could efficiently save the engineer from every liability. The very professional is being treated as the third party, rather than a party to the contract.
The case by Beacon v. SOM introduced an argument that the engineer owes Duty to the very property owner. When the case was presented in the California Supreme Court, the Beacon Residential Cmty. Ass’n v. Skidmore, Owings & Merrill LLP held the ruling by claiming that only the owner of the property owns the engineer’s duty. This ruling is important in this case because the engineer has failed in his given duty to the property owner. The work of the engineer could have harm the owner’s building. The assessment of the engineer required much deeper analysis in order to present a more undeniable report. Ruling in the Beacon Residential Cmty. Ass’n v. Skidmore, Owings & Merrill LLP supplies a total of six important points for the duty of the engineer to the property owner. The California Supreme Court has provided few considerations while deciding on the liabilities and they are- injury, connection in between the design and the injury, the public policies and the laws on prevention of future damage, the potential of the damage on the in future owners of the building and benefits of the design for the current and the future owners.
According to the rulings, the engineers must ensure that all the building residents are safe, especially the owner himself. However, while the privity of the contracts creates a limit to the damage done to the contract parties, there are several times when the privity might also be disallowed. The decisions made by the court of New Jersey in the associates of Conforti & Eisele, Inc. v. John C. Morris have presented a situation that is similar to the one that is presented in this case. It has resulted in contract that has lost a high cot because of inaccurate specifications served by the contractor. He is a municipality who has contracted the engineer in order to provide schematics for new building. Along with the engineer, he failed to supply best specifications of the building as he had promised. The court here allowed the cause showcased in the tort despite of lacking of contractual relation in between the parties and the individual involved in the contract. Hence, in this case both the architect as well as the engineer is subject to legal liability and action claims. Metrics that are provided by the ruling can be applied to determine the negligence claims that must be pursued by the municipality. In case if the contractor is lacking in a remedy, then the official designs must be blamed.
Specifics of contract are important because the engineer does not guarantee a perfect plan. The contractual laws here apply as the said had agreed on the paper that the engineer supplies a perfect plan and few mistakes are been excused. Despite of the said provisions, the engineer still must ensure that he is submitting a best quality work. The failure in the contractor’s part to review the work of the engineer is not considered as an excuse in the plan. From here it is clear that the engineer and the engineering company are liable for the said mistakes or errors that are made. It reflects that both engineer and architects has failed to supply the requirements. Moreover, the municipality also did not review that the earlier agreement were inconsequential as it is their responsibility to monitor it.
The reason for the fact that the construction crew is absolved of any of the blame in the legal argument is that of Spearin Doctrine (Dickson & Gerryshom, 2015). The doctrine states that construction crew must not be blamed if the owner himself has provided them a construction plans which re faulty. This doctrine deducts the liability and hence construction crew was not blamed. Only the engineer and his crew who are in charge of the project are blamed.
Results of court cases for the parties could come from contract between both the parties. This contract describes that the economic losses are fully covered and hence they could be used as defense claim, whereas, the possible arguments consists of absence of warranty of the quality of the product, lack in causal connection, lack in the authority for supervising the contractor.
The final argument is found in 470 Owners Corp. v. Richard L. Heimer, P.E., P.C. 685 N.Y.S.2d 747 (N.Y. App. Div.2d Dep’t 1999 case (Dickerson, Austin & Zucco, 2013). This case reflects that the engineer is not liable for any of the errors that had lead to the damages and the loss, only if the damages re been made in the areas that are not easily accessible. The engineer could use this as their defense as well as if the court agrees with this, then there will be no economic compensation given to the municipality. As an argument here, it could be stated that the funds that were released were insufficient in order to carry out comprehensive survey of the area. Hence, the eventual consequence might be that the engineer and the engineering firm will have no duty of compensating the damages depending on ruling in 470 Owners Corp. v. Richard L. Heimer, P.E., P.C. 685 N.Y.S.2d 747 (N.Y. App. Div.2d Dep’t 1999).
The engineer owns all the drawings, designs, reports or other related documents which are provided by the architect during the time of the contract. Still, the client will be having the royalty-free license and the rights for using the documents in order to construct the project. Those rights will not go beyond the construction without taking approval from the architect. The architect is however allowed to publish articles, photographs, or other related images only after gaining approval for the project (Bae, Golparvar & White, 2013)
All the products and processes that are produced are patentable and belong to the very architect. They include those which arise from the services and the client will have the access to use the information that are provided.
The schematics, material, information and other data from the project will be provided to the parties that are privy to the contract and by the architect. However, the same will fall upon the client and the parties who are involved in disclosing the confidential information to each other.
The clause is not applied to the illegal or the unsafe events which might need disclosure of the information by the parties that are involved. Only a court injunction has the right to force the parties for disclosing the information
Comprehensive and General liability makes up to $ ()
Professional Liability limits to ( )
Change in the insurance cover would not occur later than 50 days after signing the contract.
The insurance company shall be agreed upon a consensus in between the parties that are involved.
References
Bae, H., Golparvar-Fard, M., & White, J. (2013). High-precision vision-based mobile augmented reality system for context-aware architectural, engineering, construction and facility management (AEC/FM) applications. Visualization in Engineering, 1(1), 3.
Dickerson, T. A., Austin, L. B., & Zucco, B. (2013). New York State Class Actions: Making It Work-Fulfilling the Promise: Some Recent Positive Developments and Why CPLR 901 (b) Should Be Repealed. Alb. L. Rev., 77, 59.
Dickson, O. D., & Gerryshom, M. (2015). Variations in Civil Engineering Construction Projects in Kenya: Causes and Effects?. International Journal of Engineering Research & Technology, 4(2), 1124-1129.
Spiers, B. T., Halas, M., Schimmel, R. A., & Provencher, D. P. (2015). U.S. Patent No. 9,209,979. Washington, DC: U.S. Patent and Trademark Office.
Essay Writing Service Features
Our Experience
No matter how complex your assignment is, we can find the right professional for your specific task. Contact Essay is an essay writing company that hires only the smartest minds to help you with your projects. Our expertise allows us to provide students with high-quality academic writing, editing & proofreading services.
Free Features
Free revision policy
$10Free bibliography & reference
$8Free title page
$8Free formatting
$8How Our Essay Writing Service Works
First, you will need to complete an order form. It's not difficult but, in case there is anything you find not to be clear, you may always call us so that we can guide you through it. On the order form, you will need to include some basic information concerning your order: subject, topic, number of pages, etc. We also encourage our clients to upload any relevant information or sources that will help.
Complete the order form
Once we have all the information and instructions that we need, we select the most suitable writer for your assignment. While everything seems to be clear, the writer, who has complete knowledge of the subject, may need clarification from you. It is at that point that you would receive a call or email from us.
Writer’s assignment
As soon as the writer has finished, it will be delivered both to the website and to your email address so that you will not miss it. If your deadline is close at hand, we will place a call to you to make sure that you receive the paper on time.
Completing the order and download