From your lecture and also based on the below given video link:
Memory virtualization allows the system serves to share a memory space which takes up a bit of computing resource to create a separate system for m execution (Earnshaw, 2014). The memory space is often run at the application level and the memory is assigned to an application which executes itself in the shared memory
What is RAID 0?
In this method a file is broken up and the information is spread across all the physical drives which are assigned in the RAID group. It is also known a disk striping is used to increase the system performance. It enhances the reading and writing speed of the da as the data is shared across multiple hard drives.
Describe Striping, Mirroring and Parity.
Disk striping involves the division of an information into separate blocks of data which is spread over a number of storage devices such as solid state and hard disks (Umbehocker, 2014). Through this technique, a single large disk can be created from multiple small hard disks.
In data mirroring, the maintenance and creation of redundant data in a data base is done. The main aim is to decrease data corruption by maintaining a continuous availability of data and decreasing the downtime. It helps to prevent the system from getting partially compromised.
Parity drive is also referred to a physical drive which is used for fault tolerance in an array designed for RAID. Because of fast data striping, the parity drive enables the system to get fault tolerant.
Exercise 2: Storage Design (2 marks)
In the provided video, a LUN system on a storage repository has been connected to a number of servers due to the framework of OCFS2. Hence, a number of servers must stay within the group and at least one server must be present in the environment is also included as mentioned. In this criteria, the local server storage is also included as it is found in LUNs.
What is ISS?
Intelligent storage systems or ISS refers to the arrays that are RAID featured and has high input and output capabilities due to their optimization (Wookey, Low & Parry-Barwick, 2013). An operating systems control the arrays in several factors such as storage resource utilization, allocation and management.
What are the 4 main components of the ISS? ISS has four main components. The first one is called as the front end. Itb isresent between the storage and the host. The system has two sections- the front end controller and the front end ports. The front end ports allows the system to enable proper synchronization of information.
The next section is cache. IT is a semiconductor memory whIch has high input and output capabiites and s used for reducing the time between information exchange.
The thrd part is the backend which consists of back end controllers and ports. The daa is sent to th back end where it is stored for reaching its destination.
The fourth component is physical circles.
How cache works in ISS?
In ISS, Cache works by streamlining the information, distributing and monitoring it forn handling the information faster. To meet the input and output requests of the applcations, the usually stores a lot of memory to keep running and uses lo of complex calcultaions.
Storage Area Network (SAN) and Network Attached Storage (NAS) are widely used concepts in data storage arena. The following YouTube video links gives detailed description of these concepts Based on the watched videos answer the following questions:
Describe NAS and SAN briefly using diagrams?
SAN helps the system to easily access storage by connecting it to a fabric and allowoingo other servers to check the storage. NAS is used for serving remote files. Using remote controls such as NFS and CIFS, the system can direct a file acces to another device.
What are the advantages of SAN over NAS?
The advanatages of SAN over NAS is that SAN is a network of storage devices that work as one whereas NAS consists of one system that shares its own resources over the system (Monostori, 2014).
What are two common NAS file sharing protocols? How they are different from each other?Two comon protocols are AFP and NFS. NFS allow the system to alternaley refresh and restore data on a remote computer. AFP is a protol for recording and shairng information for Macs.
Part B (3 Marks)
Exercise 3: Storage Design (1 Mark)
Design Storage Solution for New Application
Scenario
An organization is deploying a new business application in their environment. The new application requires 1TB of storage space for business and application data. During peak workload, application is expected to generate 4900 IOPS (I/O per second) with typical I/O data block size of 4KB.
The vendor available disk drive option is 15,000 rpm drive with 100 GB capacity. Other specifications of the drives are:
Average Seek time = 5 millisecond and data transfer rate = 40 MB/sec.
You are required to calculate the required number of disk drives that can meet both capacity and performance requirements of an application.
Hint: In order to calculate the IOPS from average seek time, data transfer rate, disk rpm and data block size refer slide 28 in week 6 lecture slide. Once you have IOPS, refer slide 29 in week 6 to calculate the required number of disks.
Exercise 4: Storage Evolution (2 Marks)
Watch the following videos for Fiber Channel over Ethernet and answer the questions that follow
What is FCoE and why we need FCoE?
FCoE or fiber channel ver ibternet is aprotol that is used to faciltate fiber channel comuncaition over a articularly designed ethernet It accomodates the solitary Links and makes it easier for them to traverse over the ethernet medium (Larger, Penkovsky & Maistrenko, 2013). It is needed as it allows companes tyto isolate the ethernet activity from the fibre channel.
In your opinion how FCoE is cost effective than traditional connection – give brief explanation.
The switches provide an idle state of 10 microsecond in connector to connector links than the 3 seconds in port to port links. Hence, FCoE is cost effective than conventional connections.
You have read and answered about SAN in part A – based on your understanding and with some research effort answers the following questions:
What is a Virtual SAN?
Virtual SAN is a particular storage network that enable servers of various sources to access different pools of data. FCIP helps to interface the switch based on fibre channels to IP systems and acts a medium between the switch data and FC control (Arora,Parashar & Transforming, 2013).
What is IP SAN protocols and FibreChannel over IP (FCIP)?
An IP SAN is a dedicated storage area network (SAN) that allows multiple servers to access pools of shared block storage devices using storage protocols that depend on the Internet Engineering Taskforce standard Internet Protocol suite. Watch the below video about Introduction to Object-based and Unified Storage and:
Choose the correct answer from the following questions:
What is an advantage of a flat address space over a hierarchical address space?
What is a role of metadata service in an OSD node?
What is used to generate an object ID in a CAS system?
What accurately describes block I/O access in a unified storage?
What accurately describes unified storage?
Essay Writing Service Features
Our Experience
No matter how complex your assignment is, we can find the right professional for your specific task. Contact Essay is an essay writing company that hires only the smartest minds to help you with your projects. Our expertise allows us to provide students with high-quality academic writing, editing & proofreading services.
Free Features
Free revision policy
$10Free bibliography & reference
$8Free title page
$8Free formatting
$8How Our Essay Writing Service Works
First, you will need to complete an order form. It's not difficult but, in case there is anything you find not to be clear, you may always call us so that we can guide you through it. On the order form, you will need to include some basic information concerning your order: subject, topic, number of pages, etc. We also encourage our clients to upload any relevant information or sources that will help.
Complete the order form
Once we have all the information and instructions that we need, we select the most suitable writer for your assignment. While everything seems to be clear, the writer, who has complete knowledge of the subject, may need clarification from you. It is at that point that you would receive a call or email from us.
Writer’s assignment
As soon as the writer has finished, it will be delivered both to the website and to your email address so that you will not miss it. If your deadline is close at hand, we will place a call to you to make sure that you receive the paper on time.
Completing the order and download