The question of generalizability deals with the query whether the study results and conclusions derived from a research study applicable beyond the scope of study, to other people at different time points in a different place or both (Sekaran and Bougie 2016). It is this trait of the study to derive results which can be applicable to a different setting than the particular subjects of the study.
1.1 Definition
Statistical generalizability which falls under external validity criteria is the validity of the results of the analysis over different samples of the same population. These sample may vary over time and place. This is a key requirement for any statistical study to be valid. The point is to draw ideas from a sample group which can then be deduced to be applicable to the whole population in general (Creswelland Creswell2017).
Theoretical generalizability means to verify whether the insights from a study or rather the theory developed from the study could be used to study or draw relevant conclusions upon a group which is in a different place, time or situation or could be related to the observations on another group however there is no real way to measure it but to rely on the expertise of the ones conducting the research in drawing out the similarities or differences (Khan2014).
1.2. Comparison
Quantitative methods allows for the results to be objectively compared to the actual condition which allows for the researcher to be able to meaningfully quantify how generalizable a particular result is to anothersetting or a broadersample or population. This is validated usually by trying to replicate the results of the study on basis of the sample from a larger or different sample (Sekaranand Bougie 2016). This is key to any statistical study and comprises of the very basic outcomes expected of the study.A qualitative study design on the other hand comprises of conceptualizing processes and real life experiences in an in-depth manner and through higher-order abstraction. A researcher conducting a qualitative research is required to distinguish the data that is relevant to the participants of the study and identify those which are specific or unique to those in the study group and those that can be attributed to those who are in a comparable situation beyond the group under scrutiny (Khan2014). More often the data is found to be such that it cannot be interpreted objectively and the findings on the basis of the group cannot be used to directly apply to those beyond them. However, what is possible is to gather the information and form conceptual insights which can then be used to make abstractions or be used as a basis of inductive analysis on people outside of the study sample. This could be related to what is meant by theoretical generalization in qualitative research that is to find evidence that supports the conceptualization (Bernard2017). The approach is thus to affirm the results or resulting theory through analysis and interpretation, addressing the question of how credible the conclusions are. The researcher may then assert to have been able form inductive and insightful generalizations on the event or topic under scrutiny. The approach to theoretical generalization can be attested to be characterized by the following. The idea is to consider the characteristics of the sample and the observations which can be applicable to other situations beyond the sample under study in a subjective and intuitive manner (McCuskerand Gunaydin 2015.).
Taking into account the scopes that the two approach present in terms of generalizability, the suitability of one method in a particular business scenario may outweigh another. However both have their own traits which make them relevant as per the requirement. Consider a situation where a pharmaceutical company is seeking to gauge whether their new drug is going to be suitable for the market. They then conduct a case controlled study on selected individuals to test the effectiveness of the drug and find that the subjects had shown positive results after being treated with the medicine. The question now remains whether the target population in general would also replicate the expected results or not. This is an example of statistical generalization in a business setup.
Consider another case where a business is trying to gain insight regarding their recruitment process so that they could ensure that the candidates they screen have minimum risk of attrition. The study in this case is based on human behavior which is a tough aspect to quantify. The company then employs a qualitative researcher or asks its HR to take into account the behavior pattern through interviews and investigate the reasons why a candidate may want to leave and what are the traits of those who are least likely to leave the organization after employment. Having come up with a theory the company then creates a set of guidelines to narrow down their selection criteria. This is an example of theoretical generalization in a business setup.
The suitability of one method is one scenario over the other is determined solely on the basis of what one wants to study or achieve. A quantitative approach is a systematic way of investigation, whereby we can quantify the differences between populations and compare them or test the validity of conjectures on the basis of numbers (Bernard2017). Suppose it is of interest to verify whether a child in say a county like Nigeria is expected to be more malnourished than one who is from Mexico. Then this can be answered by statistical approach by comparing the body mass index of children in Nigeria and Mexico. In general,qualitative analysis for the purpose of theoretical generalization of concepts is something that is quite common among studies involving human behavior which is hard to objectively analyze or quantify. Study of situations where such nuanced information is to be scrutinized is usually handled using the approach of qualitative design. Referring to the example of comparing body mass index of Nigerian and Mexican children, a qualitative approach allows for the researcher to explore the underlying causes that may give rise to the tentative difference or lack of thereof.
1. Definition and Comparison
1.1. Definition
Parsimony and Rigor are two of the hallmarks of scientific research.The word rigor means carefulness, being detailed and scrupulous. Considering the relevance of the word in terms of research design, rigor isan essential trait to look out for in any research endeavor. Rigor in a research study is influenced by its theoretical basis andmethodology. A design which is theoretically and by design sound and is based off thorough investigation and relevant information is one which can be taken to be rigorous (Sekaranand Bougie2016).
Parsimony in design refers to the trait of the design being as simple as its scope allows it in establishing its methodological design. It’s primarily a necessity for the sake of maintaining efficiency. This may seem to be in contradiction to the pillar of rigor which urges the research to delve deep into the specifics of the situation however a good research design is one that can balance the two in such a way that given a level of rigor the model may try to capture the scenario using minimum number of variables feasible and assumptions (Sekaranand Bougie2016).
1.2. Comparison
The motivation behind parsimony is twofold. First to avoid over fitting. Second to reduce the complexity when it comes to interpreting the results. A complex design would lead to analysis of data which is unmanageable and results that are complex to read and make sense of. Rigor on the other hand is what makes the study relevant. A study which does not take into account the details of the study is in danger of over simplifying the problem rendering its practical implications as useless.Parsimony is keenly inter-related with the effort one makes for enforcing rigor. It achieved mainly through identifying those factors or variables which are most relevant to the aim and those which are expendable. Bottom line is to reduce the redundancy of the study design so that minimum effort is expended on aspects and components which may be discarded from the study without much loss to information or compromise to research objectives (Allisonet al. 2016). This can only be achieved through the thorough understanding of the topic which is part and parcel of the rigor aspect of the design. These two features of a design are therefore quite inter-dependent even though the idea may seem contradictory by definition. Nonetheless, rigor and parsimony are two significant features to consider while considering the research design and methodology.
Consider an example of a study being conducted to study the commitment of the employees of an organization of 25000 employees to its strategic goals. Further consider the scenario where the manager collects data as responses from about 25 employees for the purpose this research and arrives at several conclusions regarding how they may increase the degree of employee commitment. However this method when scrutinized in light of the pillars of scientific research would reveal to lack rigor. This as per Bernard (2017),is firstly, due to the small size of the sample the data used to arrive at the conclusions would be inadequate in that the sample may not representative of the whole population of employees. Secondly, there would exist a question regarding the degree of bias in the data owing to reporting bias on part of the employees and with no proper or specific framework of data collection to tackle the issue the results would naturally be subject to it. Thirdly aside from the reporting bias the study may have failed to account for many other factors which may influence commitment such as organizational infrastructure as well as environment which the study did not take into account from the get go and which the employees may be unable or unwilling to address and this could also give rise to inaccurate conclusions. The study therefore is need to careful consideration with respect to design for data collection, background research for the conceptual model and hence methodological design which all contribute to and are reflected by the rigor of the research design (McCuskerand Gunaydin 2015).
Consider the example of the same business problem as above regarding the manager trying to study what drives commitment of her employees. Suppose that out of all the factors that have been identified, to affect commitment towards organizational goals, only three factors explain about 48% of the variation in commitment, while after adding seven more variables to the model, it is seen that the increase in the percentage explained by the new model is 3%, amounting to about 51% of explained variation. This is not a very notable increase and given the increased complexity owing to additional seven factors. It would then be reasonable to say that the effort put into the model is not yielding as much as it should and hence the model is not economical or parsimonious and that disregarding these extra seven variables would not yield a result which is worse than the model with ten variables. So in this case the manager would prefer the first model to the second one as it would be easier for her to control three variables rather than ten while not finding much added benefit from the more tedious model.
3. Applicability
A research endeavor should always try to maintain rigor to include as much information as possible but should work to balance the ensuing complexity in such a way that the results do not become too cumbersome or beyond the manageable capacity (Bernard 2017).A thorough review of existing literature concerning the area of interest and problem as well as reading primary data can lead to a good understanding of the conceptual model which in turn can ensure that the researcher is able to balance the rigor in the model as well as reduce redundancy that is achieve parsimony in the model. It is however always a trade-off between rigor and parsimony in that the more information that the study takes into account by virtue of rigor, the lower is the parsimony and vice versa (Sekaranand Bougie2016). It is therefore of concern to the researcher to be able to identify an optimum design which does not compromise on the relevance of the information while reducing redundant information. This not only leads to ensure that the data is sufficient for the purpose of the study but also to minimize errors and increase generalizability and replicability (Allisonet al. 2016). The choice is up to the researcher to decide when to give more favor to parsimony at a point in the analysis and when to favor rigor.
References
Sekaran, U. and Bougie, R., 2016. Research methods for business: A skill building approach. John Wiley & Sons.
Allison, B., Hilton, A., O’Sullivan, T., Owen, A. and Rothwell, A., 2016. Research skills for students. Routledge.
Khan, S.N., 2014. Qualitative research method: Grounded theory. International Journal of Business and Management, 9(11), p.224.
Bernard, H.R., 2017. Research methods in anthropology: Qualitative and quantitative approaches. Rowman& Littlefield.
Creswell, J.W. and Creswell, J.D., 2017. Research design: Qualitative, quantitative, and mixed methods approaches. Sage publications.
McCusker, K. and Gunaydin, S., 2015. Research using qualitative, quantitative or mixed methods and choice based on the research. Perfusion, 30(7), pp.537-542.
Essay Writing Service Features
Our Experience
No matter how complex your assignment is, we can find the right professional for your specific task. Contact Essay is an essay writing company that hires only the smartest minds to help you with your projects. Our expertise allows us to provide students with high-quality academic writing, editing & proofreading services.Free Features
Free revision policy
$10Free bibliography & reference
$8Free title page
$8Free formatting
$8How Our Essay Writing Service Works
First, you will need to complete an order form. It's not difficult but, in case there is anything you find not to be clear, you may always call us so that we can guide you through it. On the order form, you will need to include some basic information concerning your order: subject, topic, number of pages, etc. We also encourage our clients to upload any relevant information or sources that will help.
Complete the order formOnce we have all the information and instructions that we need, we select the most suitable writer for your assignment. While everything seems to be clear, the writer, who has complete knowledge of the subject, may need clarification from you. It is at that point that you would receive a call or email from us.
Writer’s assignmentAs soon as the writer has finished, it will be delivered both to the website and to your email address so that you will not miss it. If your deadline is close at hand, we will place a call to you to make sure that you receive the paper on time.
Completing the order and download