The report is prepared for the development of a network solution for the Orange site and connect it with the other branches with the establishment of a VPN connection between the other sites. The network is designed with the preparation of an IP addressing plan and documented in the report for the management of the current network infrastructure of the organization. The report is prepared by documenting the major goals of the organization and the scope for the further improvement of the network design. A logical design of the network is prepared and attached with the report for providing a brief overview of the network design. A proper addressing and naming scheme is followed for the development of the network and assigning an IP address to all the interface of the network device installed in the network. The IP addressing scheme is used for configuration of the servers with DHCP such that it can be used for automatically assign the IP address to nodes connected in network. The routing and the switching protocol used for the configuration of the network are analysed and the routers are configured with the routing protocol such that it can be used for communicating with the hosts connected with the interface of the other branches of the organization. The security measures that should be implemented for the development of the network solution is analysed for securing the network. The network management strategy that should be followed for management of network resources are also documented in report. The physical network design is also attached with the report with the details of the network topology selected for the development of the local area network and the wide area network of the organization. A physical network diagram is attached with the report for providing an overview of the network and the minimum server and the Pc requirement that should be used for network are also given in the report. It also defines the wireless technologies that can be implemented for enabling the users to connect their wireless devices with the network are discussed.
The main goals identified for the development of the network framework for the organization is listed below:
For the preparation of the logical network diagram the each of the network site is divided into different subnets and different VLANs are created on the switch for connecting the site with each other. The devices required for interconnecting the network with each other are analysed for preparation of the list of hardware component. The configuration that should be made for enabling remote connection with the network are analysed for the development of the network. The diagram is properly labelled with the addressing scheme and documented in the report such that it can be used by the network development team for configuring the network device according to the network plan.
|
Subnet – 1 |
|
|
Network Address |
10.16.66.0 |
|
Subnet Mask |
255.255.255.224 |
|
Valid host address range (can be used to assign to PCs, servers, IP phones, etc.) |
10.16.66.1 – 10.16.66.30 |
|
Broadcast Address |
10.16.66.31 |
|
Subnet – 2 |
|
|
Network Address |
10.16.66.32 |
|
Subnet Mask |
255.255.255.224 |
|
Valid host address range (can be used to assign to PCs, servers, IP phones, etc.) |
10.16.66.33 – 10.16.66.62 |
|
Broadcast Address |
10.16.66.63 |
|
Subnet – 3 |
|
|
Network Address |
10.16.66.64 |
|
Subnet Mask |
255.255.255.224 |
|
Valid host address range (can be used to assign to PCs, servers, IP phones, etc.) |
10.16.66.65 – 10.16.66.94 |
|
Broadcast Address |
10.16.66.95 |
|
Subnet – 4 |
|
|
Network Address |
10.16.66.96 |
|
Subnet Mask |
255.255.255.224 |
|
Valid host address range (can be used to assign to PCs, servers, IP phones, etc.) |
10.16.66.97 – 10.16.66.126 |
|
Broadcast Address |
10.16.66.127 |
|
Subnet – 5 |
|
|
Network Address |
10.16.66.128 |
|
Subnet Mask |
255.255.255.248 |
|
Valid host address range (can be used to assign to PCs, servers, IP phones, etc.) |
10.16.66.129 – 10.16.66.134 |
|
Broadcast Address |
10.16.66.135 |
|
Subnet – 6 |
|
|
Network Address |
10.16.66.136 |
|
Subnet Mask |
255.255.255.248 |
|
Valid host address range (can be used to assign to PCs, servers, IP phones, etc.) |
10.16.66.137 – 10.16.66.142 |
|
Broadcast Address |
10.16.66.143 |
|
Subnet – 7 |
|
|
Network Address |
10.16.66.144 |
|
Subnet Mask |
255.255.255.248 |
|
Valid host address range (can be used to assign to PCs, servers, IP phones, etc.) |
10.16.66.145 – 10.16.66.150 |
|
Broadcast Address |
10.16.66.151 |
|
Subnet – 8 |
|
|
Network Address |
10.16.66.152 |
|
Subnet Mask |
255.255.255.248 |
|
Valid host address range (can be used to assign to PCs, servers, IP phones, etc.) |
10.16.66.153 – 10.16.66.158 |
|
Broadcast Address |
10.16.66.159 |
For the preparation of the IP addressing plan the subnet is divided into 8 subnets and the router and the other network device interfaces should be configured according to the IP addressing plan. Each of the VLAN should be named after the department and the network should be divided into small manageable sections such that unwanted broadcast messages are not generated and the congestion in the network are reduced.
Routing refers to the movement of information in an inter-network from a source to destination. As commented by Batalla et al. (2016). It is the path referred to selection of path over which help n sending packets to the router. It helps in maintaining a bridge between the source and destination for sending the packets through a channel. The use of routing protocols helps in providing a keen approach to the transfer of signals and a data packets through the channel between source and destination. The distinction helps in routing and bridging with different data and information with help of moving information from source to destination. However, the routing algorithm is a part of network layer software that is responsible for the transfer of data packets through a channel.
As mentioned by Javed, Afzal & Kim (2018), routing protocols uses metrics for evaluating the path bandwidth and reliability of the routing algorithm for determining optimal path to destination. This include the destination information and address. Routing algorithm helps in filling routing tables with a variety of information. When a switch gets an appropriate function, it starts checking goal deliver and endeavours to connect this address with a next jump. As stated by Velez et al. (2015), by dissecting various updates from single other switch, a switch can create an image of the system topology. There are various routing algorithm metrics that helps in determining the best route. Some of the routing metrics have been discussed below:
Path length: As commented by Vinel et al. (2016), it is a common routing metric. This protocol helps in allowing network administrators for assigning arbitrary costs to each network link. Path length refers to cost of cost included in each link traversed. Other routing protocols helps in defining hop count that include number of passes in the internetworking products.
Routing delay: As mentioned by Sampei (2017),it refers to the length of time required for moving the packets from source to destination by internet. However, delay depends on various factors that include bandwidth of medium internet links.
Bandwidth: It refers to availability traffic capacity of link. Every single other thing being equivalent, a 10-Mbps Ethernet connection would be desirable over a 64-kbps rented line. In spite of the fact that transmission capacity is a rating of the most extreme achievable throughput on a connection, courses through connections with more noteworthy data transfer capacity do not really give preferred courses over courses through slower interfaces. For instance, if a quicker connection is busier, real time required to send a parcel to goal could be more prominent.
Load: As commented by El-Bawab et al. (2018), it alludes to how much a system asset, for example, a switch, is occupied. Load can be computed in an assortment of ways, including CPU usage and parcels prepared every second. Observing these parameters consistently can be asset serious itself.
Communication cost: It is another critical metric, particularly in light of the fact that a few organizations may not think about execution as much as they think about working consumptions. In spite of the fact that line postponement might be longer, they will send parcels over their own lines as opposed to through people in general lines that cost cash for use time.
As mentioned by Zinner et al. 2017), reliability with regards to steering calculations, alludes to the constancy (normally depicted as far as the bit-mistake rate) of each system interface. Some system connections may go down more frequently than others. After a system comes up short, certain system connections may be repaired more effectively or more rapidly than different connections. Any unwavering quality factor can be considered in the task of the dependability evaluations, which are discretionary numeric qualities, typically appointed to arrange connects by organize managers.
For securing the network from illegal access different security measures can be applied and it is the key for the success of the network. Different factors should be considered such as location of the firewalls, devices installed in the DMZ zone, Access control list and the VPN tunnelling for end to end point connection. The firewall should be installed in the entry point of the DMZ zone such that the access of the resources in the DMZ zone should be restricted and another firewall should be installed in the exit point such that the internal and the external network can be secured from the illegal access. For increasing the security of the network the wireless access point should also be secured with the application of the WPA PSk 2 encryption algorithm. Client server architecture model can be used for increasing the security of the network. The implementation of a RADIUS server helps in communicating with the rest of the network with the central server and it acts as a central point of failure. Different authorization mechanism should be followed for the management of the network service and allow the remote users to connect with the network.
The virtual LANs consists of a subset of the ports for a single switch or it is a subset of the ports on multiple switches. With the creation of the VLAN the traffic generated on the traffic are not seen on the network and it enables the network administrator to partition the network into smaller subnet for managing the network efficiently and meet the functional and the security requirement of the organizational network. For the development of the VLAN the IEEE 802.1 Q standard is followed and it also enables to reduce the congestion in the network and increasing the network performance. The switch port of a switch can be assigned to a VLAN and it can also be allowed to divide the network into different groups that can be based on the departments. Different rules can be set on the network for allowing the user to access the servers installed in the network.
Eight different VLAN are created for the network and one of the server is installed in the DMZ zone in the DMZ VLAN while the other server is installed in the server VLAN for increasing the security of network and protect the resources for external agents. The main users of VLAN are the users working in the department and the switch are configured with the trunk protocol such that the port can be used for inter VLAN routing. The VLAN should be assigned with a range of IP address such that it can be used by the network for communicating with the other users connected in different VLAN of the network.
A wireless access point is connected for each of the department and a separate VLAN should be used for the wireless network such that the intruder cannot access the core resources of the network by connecting their wireless device in the network. The wireless access point should be installed in each of the floor of the building and 2.4 Ghz channel should be used for the transmission of the wireless signals over the network. The area of coverage of the wireless access point should be analysed for covering the local area network and encryption algorithm should be applied in the wireless access point such that it cannot be accessed by the unauthorised users. Proper authentication mechanism should be followed by the users for connecting with the wireless network and use it for sending and receiving the data packets to the destination address using the network.
The WAN solution is prepared for the organization and IEEE 802.11 b is used for providing a data rate of 11 mbps to all the network device connected with the organizational network. The bit rate can be decreased to 5.2, 2 or 1 mbps if the quality and the strength of the signal decreases. Thus there is a requirement to cover the organizational area with the wireless access point.
Quality of service has helped in enabling technology for maintaining the data networks. The business models include the QoS agreement for providing a better networking system in the company. As mentioned by Natalizio et al (2018), the QoS helps in evolving business networks in the market. The use of the QoS mechanism in the business networks have helped in providing a secure network system to the organization. The end-to-end Qos has helped in reaching out of a huge number of devices connected in network. The use of QoS design have been applicable to the slow speed wide area networks or Internet. However, many researchers have argued with this policy and stated it as a myth. As mentioned by Tanaka (2w014), networks without QoS enabled has been described it as a best-effort networks. This administration class is expected for flagging movement that backings IP voice and video communication. Movement in this class ought to be checked CS3 also, provisioned with a (direct, yet committed) ensured data transfer capacity line. WRED ought not be empowered on this class, as flagging activity ought not be dropped (if this class is encountering drops, at that point the transmission capacity designated to it ought to be re-provisioned). Illustration activity incorporates SCCP, SIP. As stated by He, Bukralia & Huang (2017), there is a virtual blast of media applications on the IP coordinate with a wide range of sorts of voice, video, also, information applications. For instance, voice streams can be standard IP Telephony, top quality sound, Internet VoIP, and so on. Correspondingly, there are numerous kinds of video, including on-request or communicate work area video, low-definition intelligent video, (for example, webcams), top quality intelligent video, (for example, Cisco TelePresence), IP video observation, advanced signage, and amusement situated video applications. Thus, there is a practically boundless number of information applications. Furthermore, past the current media blast, numerous new applications are coordinating various kinds of media streams into end-client applications.
As commented by Ma et al. (2015), network management is a service that helps in employing several protocols, tools, applications and devices for assisting human network managers for controlling and monitoring proper network. A network management system deals with the collection of application for enabling network components needs to be controlled and monitored. The design comprises of two key components:
As commented by Young, Shakiba, Kwok, & Montazeri (2014), an overseeing gadget, called an administration station, or an administrator and oversaw gadgets, called administration specialists or essentially an operator. An administration station fills in as the interface between the human system administrator and the system administration framework. It is the stage for administration applications to perform administration works through collaborations with the administration operators. The network management strategy that should be followed for management of network resources are also documented in report. The physical network design is also attached with report with details of network topology selected for development of local area network and the wide area network of the organization. The administration specialist reacts to the solicitations from the administration station and furthermore furnishes the administration station with spontaneous data. As mentioned by Han et al. (2016), setup administration is worried about introducing a system, provisioning the system assets furthermore, administrations, and checking and controlling the system. All the more particularly, the obligations of design administration incorporate setting, looking after, including, and refreshing the relationship among segments and the status of the segments amid organize activity. Setup administration comprises of both gadget design and system arrangement.
Gadget setup can be performed either locally or remotely. Computerized organize arrangement,
For example, Dynamic Host Configuration Protocol (DHCP) and Domain Name Services (DNS), plays a key part in arrange administration.
As suggested by Hagenauer, Dressler & Sommer (2014), security management helps in protecting networks and system from unauthorized access and security attacks. The mechanism included in the security management contains encryption, authentication and authorization. Therefore, security, management deals with the distribution, generation and security systems including firewalls and virus detection system. As commented by Guo, Zhu & Yang (2017), the use of updated anti-virus and firewalls helps in maintaining and restricting viruses and malwares in network. Accounting system management helps in enabling charges for using the managed objects for measuring and determining the cost. This helps in calculating the budget of the network project in market.
As commented by Prakash et al. (2018), topology focuses on the method by which various computers and devices are connected in a network. The selection of topology depends on the user requirements. Various types of topologies are discussed below:
Mesh Topology: As commented by Jabeur, Sahli & Zeadally (2015), this topology refers to the connection of each node with every node connected in a network. However, mesh topology is not flexible and has a poor expandability as adding a new node becomes difficult for the network administrator. However, there is no need to provide an extra information about the source point of data packet along with the destination point of the data packet.
Bus Topology: In this topology, all the nodes are connected in a linear transmission medium. Full-duplex operation used to happen between stations and tap that helps in allowing data transmission in the bus. At each finish of transport there is an eliminator that ingests any flag, keeping impression of flag from endpoints. In event that the eliminator is absent, the endpoint demonstrations like a mirror and mirrors the flag back causing obstruction and different issues.
Star topology: As commented by Lauren & Pigg (2016), this topology refers to a connection in which all the nodes are connected in the common central node. Therefore, each node is independently and directly connected with the central node for the data transmission process. A very high speed data transfer speed can be achieved by the star topology as all the computers are connected directly with the central node. This topology can be maintained and managed by the network administrator other than other topologies.
Ring topology: As mentioned by Leonardi (2015), Ring topology includes various repeaters that are connected together by a point-to-point closed loop.
Now a day computer technology is rapidly growing all over the world. As commented by Pinchuk (2015), through the internet many systems are now networked together for established an online connection to the globe. Local area network (LAN) interconnect the computers of companies and individuals. LAN users can store much information, data and applications as has their disposal.
As mentioned by Roy e al. (2014), users of LAN offered high bit rates for meeting requirements of bandwidth consuming services including video conferences, streaming video for this kind of facility in LAN, a WLAN user will expect a high demand from their system. For this reason certified computer engineers are still working on this and they are trying to improve the technology of LAN as well as WLAN.
As commented by Rodriguez et al. (2017), WLAN technology was found in the year of 1990 for no selling of LAN network to enterprise or campus environment.at the beginning wlan products were slow, expensive and bulky. Even mobile network connectivity was simple network that was not stranger and secure network.
Architecture
Architecture of a wireless network is divided into cells s controlled by a base station. Standards of wireless networks are currently being used in communications technology are IEEE 802.11, hiper lan, Bluetooth, .homerf and Narrowband of wlan.
Spread spectrum
Spectrum technology is allowed to spread for developed military use by continually changing frequency of transmitted signal. Uses of spectrum technology is more than narrowband technology
Frequency hopping spread spectrum
As commented by Dong, Piuri, Chan & Jain (2016), frequency hopping spread spectrum technology is mainly used to synchronised changing the frequency of both transmitter and receiver and produce a single transmission signal.
Wireless devices are need to be small and wireless networks are limited in bandwidth but it faced some challenges. These are-
As commented by Thirumalai & Senthilkumar (2017), for support future high speed applications now current data rates need to be improve if multimedia services are provided. Data rates is just a small function of various factors.
Wireless mobile’s size and battery power limitation place a limit at range.
As mentioned by Anderson et al. (2016), security is a major challenge in wireless networking, especially in e-commerce and m commerce applications.
6.4 Physical Network Diagram
For the development of the physical network diagram a feasibility study is performed on the network and it is location that should be used for the deployment of the different network device are analysed. The name and device of the router that should be deployed in the network are used for designing the physical network diagram. Cisco packet tracer 7.1. is used for the development of the logical network diagram and it should be configured with different routing protocols and technology for enabling communication with the other device connected in the host. The IP addressing scheme should be used for the configuring the routers with the Cisco 2811 series routers are used for the configuration of the network. Cisco 2960 series switch is used for connecting each of the department and creating different VLANs for the department and reduce the congestion in the network.
There are some minimal server and C requirements for the project. In the case of the Windows operating system, the minimum requirement of the operating system is Windows 7 with Processor Intel core i3. The minimum RAM required is 8 GB with hard disk of 60GB available. The browser requirement is Internet Explorer, Chrome and Firefox. Network Adapter for the project wired connection including LAN. The internet speed needs to be at least 3G speed. The device must be supported by Smart phones and tablets.
However, in the case of the Mac OS X Operating System, the operating system requirement is OS X 10.6 with processor of Intel Core i3. The required primary memory is 8 GB with secondary memory of 128 GB. The project can run over browser including Safari, Chrome, and Firefox. The network adapter is LAN connection with an internet speed of 3G is required. It can be supported by Smart phones and tablets.
As commented by Çetinkaya (2016), the wireless technologies refers to the communication and data transmission with the help of Electromagnetic waves in the atmosphere. The channel for the wireless communication have been always air. There is no physical and direct connection between sender and receiver in this technology. As commented by Luchin et al. (2018), both the sender and receiver are connected with the help of wireless technology and protocols. The use of electromagnetic waves helps in gaining the speed of light and that makes the fastest communication. Therefore, wireless communication is more preferred in long distance communication. As suggested by Liu & Zhang (2015), the wireless technologies have been increasing on a daily basis. Therefore, the maintenance of the communication technology need to be properly done. An administration station fills in as the interface between the human system administrator and the system administration framework.
It is the stage for administration applications to perform administration works through collaborations with the administration operators. The administration specialist reacts to the solicitations from the administration station and furthermore furnishes the administration station with spontaneous data. There are various types of wireless technologies including the cellular system and Bluetooth. As stated by Wu et al. (2016), bluetooth has been developed for removing the wired connection between short distances. Therefore, the replacement of the wired technology have helped in minimizing the cost ad budget of the network system. The use of Bluetooth gave been generally used in the mobile devices at a shirt distance. The use of Bluetooth technology have been maintaining the communication at a shirt distance. The use of maintenance of the Bluetooth technology have been maintaining the fast communication of the data and information in the channel. As mentioned by Peng, Li, Zhao & Wang (2015), the use of Bluetooth technology have been misnaming the congestion of network and replacing the complex wired technology.
The range of the Bluetooth technology have been 10 metres with 0dbm transmitted power. However, it can be increased upto 100 metres. As commented by Chen et al. (2015), the Bluetooth technology is mainly used in the mobile communication and other electronic devices. Data packets are send through the source and is reached to the destination through air as a medium. There are various Bluetooth devices including mobile, printer, audio box, headphones and laptops. Therefore, the use of the Bluetooth technology has been spread a lot of devices. Therefore, the use of the Bluetooth technology have been creating a positive impact in the wireless communication.
The test plan is prepared for the orange site of Globex Corporation for the identification of the requirement and align the network for increasing the security of the department. The LAN and WAN solutions are created for a site to site VPN connection is created for increasing the security of thee network. The design of the network should be evaluated for the identification of the weakness of the network and identification of the limitations of the network.
The response time of the network should be identified and network load and the path should be estimated for the analysis of the peak estimated load of the network. The acceptance criteria of the network should be minimum of 2 mbps and the impact of the test traffic on the network should be identified. The congestion in the network and the packet loss should also be identified for the analysis of the test result and implement the network failover plan.
Hardware, software and the test tools are required for the completion of the test and it should be included in the test plan for the estimation of the resource. The exact hardware should be documented with the software versions and the components used for the different test scenarios.
The hardware needed to be tested
Product Description Quantity
2811 Cisco 2811 Router 2
2960 Cisco 2960 24 port switch 7
5505 Cisco ASA firewall 1
The details of the hardware should be included in the report for the identification of the test result and the errors in the configuration of the network devices.
|
Platform |
Role |
Cisco IOS Software Version |
Image /Feature Set |
|
2811 |
CE Router |
12.3 (14) T7 |
c2800nm-adventeerprisek9-mz. 123-14.T7.bin |
|
2960 |
L2 Switch |
12.2(46) |
cat4500e-entservicesk9-mz.122-46.SG.bin |
|
Role |
Name |
Resource Allocation |
|
Program manager |
Josher |
As required |
|
Test lead |
George |
100% |
|
Test manager |
Cosmo |
25% |
|
Test and documentation |
Henri |
100% |
|
Date |
Milestone |
Deliverables |
|
10/05/2018 |
Start test plan |
Review of the test case and high level review |
|
13/05/2018 |
Review and approval of the test plan |
Document review with the accounts team and the customer |
|
16/05/2018 |
Criteria of entrance criteria |
Committing the project execution |
|
18/05/2018 |
Test start |
Dependency on the test entrance criteria |
|
20/05/2018 |
Test complete |
Completion of all test case |
|
23/05/2018 |
Completion of test report |
Completion of the final test results |
|
25/05/2018 |
Review of internal test document |
Test document review with the internal team |
|
28/05/2018 |
Review of the test document with customer |
Test document customer review |
|
30/05/2018 |
Lab topology teardown |
Completion of the test project |
It is important to specify the set of preconditions, steps and the expected outputs such that the results can be determined with the application of the feature for passing or failing the test. The involvement of the users and the different tests that should be performed should be identified for understanding the following the following:
References
Anderson, J., Hu, H., Agarwal, U., Lowery, C., Li, H., & Apon, A. (2016, February). Performance considerations of network functions virtualization using containers. In Computing, Networking and Communications (ICNC), 2016 International Conference on (pp. 1-7). IEEE.
Batalla, J. M., Mastorakis, G., Mavromoustakis, C. X., & Zurek, J. (2016). On cohabitating networking technologies with common wireless access for home automation system purposes. IEEE Wireless Communications, 23(5), 76-83.
Çetinkaya, E. K. (2016). A Brief Review of Security in Emerging Programmable Computer Networking Technologies. IEEE-HKN Bridge Magazine, 112, 27-34.
Chen, W., Delgrossi, L., Kosch, T., & Saito, T. (2015). Automotive networking and applications [Series Editorial]. IEEE Communications Magazine, 53(6), 124-125.
Dong, M., Piuri, V., Chan, S. H. G., & Jain, R. (2016). Introduction to Special Issue on Multimedia Big Data: Networking. ACM Transactions on Multimedia Computing, Communications, and Applications (TOMM), 12(5s), 70.
El-Bawab, T. S., Subrahmanyan, R., Atkin, G., & Dohler, M. (2018). ADVANCES IN NEXT-GENERATION NETWORKING TECHNOLOGIES FOR SMART HEALTHCARE. IEEE Communications Magazine, 2.
Guo, Y., Zhu, H., & Yang, L. (2017). Smart service system (sss): A novel architecture enabling coordination of heterogeneous networking technologies and devices for internet of things. China Communications, 14(3), 130-144.
Hagenauer, F., Dressler, F., & Sommer, C. (2014, December). Poster: A simulator for heterogeneous vehicular networks. In Vehicular Networking Conference (VNC), 2014 IEEE (pp. 185-186). IEEE.
Han, G., Guizani, M., Lloret, J., Wu, H., Chan, S., & Rayes, A. (2016). Recent advances in green industrial networking [Guest Editorial]. IEEE Communications Magazine, 54(10), 14-15.
He, N., Bukralia, R., & Huang, H. W. (2017, October). Teaching wireless networking technologies in the internet-of-things using ARM based microcontrollers. In Frontiers in Education Conference (FIE) (pp. 1-4). IEEE.
Jabeur, N., Sahli, N., & Zeadally, S. (2015). Enabling cyber physical systems with wireless sensor networking technologies, multiagent system paradigm, and natural ecosystems. Mobile Information Systems, 2015.
Javed, F., Afzal, M. K., Sharif, M., & Kim, B. S. (2018). Internet of Things (IoTs) Operating Systems Support, Networking Technologies, Applications, and Challenges: A Comparative Review. IEEE Communications Surveys & Tutorials.
Lauren, B., & Pigg, S. (2016). Networking in a field of introverts: The egonets, networking practices, and networking technologies of technical communication entrepreneurs. IEEE Transactions on Professional Communication, 59(4), 342-362.
Leonardi, P. M. (2015). Ambient awareness and knowledge acquisition: using social media to learn ‘who knows what’and ‘who knows whom’.
Liu, C. H., & Zhang, Y. (2015). Networking Technologies for CPS. In Cyber Physical Systems (pp. 148-152). CRC Press.
Luchin, D. V., Trofimov, A. P., Filippov, D. V., & Yudin, V. V. (2018, March). Algorithm of radio direction finding in the HF range in polarization fading conditions with collocated antennas. In Electronic and Networking Technologies (MWENT), 2018 Moscow Workshop on (pp. 1-8). IEEE.
Ma, J., Sui, X., Li, Y., Yu, Z., Huang, B., & Bao, Y. (2015). Supporting Differentiated Services in Computers via Networking Technologies. TinyToCS, 3.
Natalizio, E., Cavalcanti, D., Chowdhury, K., & El Said, M. (2018). Advances in Wireless Communication and Networking for Cooperating Autonomous Systems.
Park, J. B., & Park, K. S. (2014). U.S. Patent No. 8,682,361. Washington, DC: U.S. Patent and Trademark Office.
Peng, M., Li, Y., Zhao, Z., & Wang, C. (2015). System architecture and key technologies for 5G heterogeneous cloud radio access networks. IEEE network, 29(2), 6-14.
Pensas, H., Vainio, A. M., Garschall, M., Kivimäki, T., Konakas, S., Costicoglou, S., & Vanhala, J. (2014, June). Using ambient communication and social networking technologies to reduce loneliness of elders. In International Conference on Social Computing and Social Media (pp. 91-102). Springer, Cham.
Pinchuk, O. P. (2015). Historical and analytical review of social networking technologies and prospects of their use in training. Information Technologies and Learning Tools, 48(4), 14-34.
Prakash, P., Rezendes, A. P., Schneider, G., & Junkkonen, L. (2018). U.S. Patent No. 9,891,800. Washington, DC: U.S. Patent and Trademark Office.
Rodriguez, J., Radwan, A., Barbosa, C., Fitzek, F. H., Abd-Alhameed, R. A., Noras, J. M., … & Rayit, A. (2017, September). SECRET—Secure network coding for reduced energy next generation mobile small cells: A European Training Network in wireless communications and networking for 5G. In Internet Technologies and Applications (ITA), 2017(pp. 329-333). IEEE.
Roy, R. R., Afshar, S. K., Croak, M. R., Cuevas, E. G., Faryar, A., Fisher, S., … & Russell, L. A. (2014). U.S. Patent No. 8,625,578. Washington, DC: U.S. Patent and Trademark Office.
Sampei, S. (2017). Development of Wireless Access and Flexible Networking Technologies for 5G Cellular Systems. IEICE Transactions on Communications, 100(8), 1174-1180.
Sha, K., Striegel, A., & Song, M. (Eds.). (2016). Advances in Computer Communications and Networks: From Green, Mobile, Pervasive Networking to Big Data Computing. River Publishers.
Smelyanskiy, R. (Ed.). (2014). 2014 First International Science and Technology Conference (Modern Networking Technologies)(MoNeTeC): Moscow, Russia: October 27-29, 2014:(SDN & NFV: Next Generation of Computational Infrastructure). IEEE.
Tanaka, A. (2014, November). Technical challenges of information communication in disaster areas with delay tolerant networking technologies. In Microwave Conference (APMC), 2014 Asia-Pacific (pp. 660-661). IEEE.
Thirumalai, C., & Senthilkumar, M. (2017, February). An assessment framework of intuitionistic fuzzy network for C2B decision making. In Electronics and Communication Systems (ICECS), 2017 4th International Conference on (pp. 164-167). IEEE.
Velez, F. J., Nadziejko, A., Christensen, A. L., Oliveira, S., Rodrigues, T., Costa, V., … & Gomes, J. (2015, September). Wireless sensor and networking technologies for swarms of aquatic surface drones. In Vehicular Technology Conference (VTC Fall), 2015 IEEE 82nd (pp. 1-2). IEEE.
Vinel, A., Chen, W. S. E., Xiong, N. N., Rho, S., Chilamkurti, N., & Vasilakos, A. V. (2016). Enabling wireless communication and networking technologies for the Internet of Things [guest editorial]. IEEE wireless communications, 23(5), 8-9.
Wu, S., Wang, H., Wu, D., Chatzimisios, P., & Chen, Z. (2016). Security and networking for cyber?physical systems. Security and Communication Networks, 9(9), 807-807.
Yan, Z., Wang, H., Yang, L. T., & Niemi, V. (2018). IEEE Access Special Section Editorial: Trust Management in Pervasive Social Networking (TruPSN). IEEE Access, 6, 16851-16854.
Young, S. D., Shakiba, A., Kwok, J., & Montazeri, M. S. (2014). The influence of social networking technologies on female religious veil-wearing behavior in Iran. Cyberpsychology, Behavior, and Social Networking, 17(5), 317-321.
Zinner, T., Wamser, F., Leopold, H., Dobre, C., Mavromoustakis, C. X., & Garcia, N. M. (2017). Matching requirements for ambient assisted living and enhanced living environments with networking technologies. In Ambient Assisted Living and Enhanced Living Environments (pp. 91-121).
Essay Writing Service Features
Our Experience
No matter how complex your assignment is, we can find the right professional for your specific task. Contact Essay is an essay writing company that hires only the smartest minds to help you with your projects. Our expertise allows us to provide students with high-quality academic writing, editing & proofreading services.
Free Features
Free revision policy
$10Free bibliography & reference
$8Free title page
$8Free formatting
$8How Our Essay Writing Service Works
First, you will need to complete an order form. It's not difficult but, in case there is anything you find not to be clear, you may always call us so that we can guide you through it. On the order form, you will need to include some basic information concerning your order: subject, topic, number of pages, etc. We also encourage our clients to upload any relevant information or sources that will help.
Complete the order form
Once we have all the information and instructions that we need, we select the most suitable writer for your assignment. While everything seems to be clear, the writer, who has complete knowledge of the subject, may need clarification from you. It is at that point that you would receive a call or email from us.
Writer’s assignment
As soon as the writer has finished, it will be delivered both to the website and to your email address so that you will not miss it. If your deadline is close at hand, we will place a call to you to make sure that you receive the paper on time.
Completing the order and download