What are Plastics: By: Fadi Alqouza
Plastics consist of chains made of molecules bonded together. These chains are classified as polymers. Thus, many plastics begin with poly, for example polyethylene, polystyrene, and polypropylene. Also, well many types of coatings, sealants and glues are composed of plastics as well.
What is Polyethylene?
Polyethylene is a light, versatile resin which consists of polymerisated ethylene. Polyethylene is a part of the polyolefin resins family. Polyethylene is the most used plastic in today’s modern globe, being produced into products ranging from clear food wrap and shopping bags to detergent bottles and automobile fuel tanks. Polyethylene is also slit or spun into synthetic fibres or modified in labs to possess elastic properties like of a rubber.
Chemical Composition and Molecular Structure:
Ethylene is a hydrocarbon with gaseous properties and possess a simple structure of C2H4. Ethylene is found naturally as a natural gas or can be distilled from petroleum. The molecules that compose Ethylene are essential to make two methylene units, CH2. The methylene units are bonded together by a double bond between the carbon atoms, forming a structure of CH2=CH2.
Figure 1:
Figure 2:
Figure 1&2: The structure of methylene once broken for Ethene, is repeated thousands of times in a single molecule, to make polyethylene.
Ethylene with the structure of C2H4 is a highly stable molecule with two carbon atoms and a double bond. Polymerisation is a key factor is producing the polymer of polyethylene, as polymerisation involves the reaction monomer molecules in a chemical reaction to form a polymers chain/chains ore could result in three dimensional networks. Due to the influence of polymerisation catalysts the double bond can be broken, and the result is a single bond structure that can be used to bond a carbon atom in another ethylene molecule. Thus, the repeating of this process results in a polymeric molecule as shown in figure 1.
Get Help With Your Essay
If you need assistance with writing your essay, our professional essay writing service is here to help!
Essay Writing Service
The simple structure of Ethylene (CH2=CH2), is repeated thousands of times in a single molecule, to make polyethylene as shown in figure 1. The polymeric molecule, in which hydrogen atoms are connected to a single carbon backbone, which can be produced in linear or branched forms. Branched versions are known as low-density polyethylene or linear versions that are known as high-density polyethylene.
How is Polyethylene produced?
Low density polyethylene:
Low density polyethylene is manufactured from gaseous ethylene under extremely high pressures, around 350 megapascals. Also, its synthesised under high temperatures, up to 350 °C with the aid of oxide catalysts This method produces a polymeric structure with both long and short branches. The low-density polyethylene has a melting point that is approximately 110 °C. This is due to the branches that prevent the polyethylene molecules from packing closely together hard and crystalline arrangements, however it make the molecules very flexible. The main usage of low-density polyethylene in today modern society are packaging film, trash, grocery bags, agricultural mulch, wire and cable insulation, squeeze bottles, toys, and housewares.
High-density polyethylene
High-density polyethylene is usually manufactured using Zousing Ziegler-Natta and metallocene catalysts or activated Chromium oxide accompanied with low pressure and temperature. Also due to the lack of branches in the structure of High-density polyethylene, allow the polymeric molecule chains to pack closely and forming a high crystalline material of high strength resulting in a High dense molecule. Due to the structure being packed closer, it gives it a melting point that is higher by 20 °C than low density polyethylene. Due to these features the High-density polyethylene can be synthesised into blow-moulded bottles for milk, household cleaners, blow-extruded grocery bags, construction film, agricultural mulch, injection-moulded pails, caps, appliance housings, and toys.
How is Polyethylene disposed of?
Figure 3: Showcases different types of polyethylene products and their recycling code.
In modern society, plastic production has domestically increased in recent years, increase by 325.5 million tons, also it is believed to double by 2036,
By 2014, Americans disposed about 33.6 million tons of polyethylene products, however only 3.192 million tons are recycled which amounts to 9.5% and 5.04 million was combusted to produce electricidal and heat energy which also amounts to 15%.
The rest of the disposed polyethylene ends up in landfills, the disposed polyethylene products takes 500 years to decompose, and threatens the environment as leaks pollutants the soil and water. Scientist estimate that 165 million tons of polyethylene products have already contaminated our oceans threatening the health and safety of marine life. They also estimate that an average of 8.8 million tons of polyethylene to enter our ocean each year. The products include polyethylene fibres no longer then 5 millimetres longs, which possess the risk of being ingested by marine wildlife.
Recycling of High and Low-Density Polyethylene
High-density polyethylene is currently recycled at most recycling centres around the globe, as polyethylene has an easy structure to break down and recycle and is given code #2 as shown in figure 3.
Step 1: The plastic is cleaned and decontaminated, to remove any microbes that might present on the product.
Step 2: plastic polymers are separated by using sink-float separation, as high-density polyethylene has a density of 0.93 to 0.97 g/cm3. This density is lower than of PET’S which is 1.43-1.45 g/cm3 and has the recycling code of #1 as shown in figure 3.
Step 3: High-density polyethylene is then shredded and melted down to further refine the polymer. The plastic (polyethylene products)’[] is then cooled into pellets which can be used in manufacturing.
Recycling of Low-density Polyethylene:
Low-density polyethylene is currently
Step1: Personal at recycling centres, melt low density polyethylene products to eliminate any contaminations that might be present on the product and is given the code #4.
Step 2: Once the low-density polyethylene products have been melted, its later compressed into thin plastic sheets.
Step 3: Plastic manufacturers purchase the recycled low-density polyethylene and remelt into products that treat carpet and manufacturing.
Advantages and disadvantages of polyethylene.
Advantages
Has versatile properties, as polyethylene is water resistant, durable and can be produced to have low density, thus it can be produced to store liquor and other liquid products.
The recycled polyethylene can be reused as bin liners, shopping bags and carpet heating products. .
Due to polyethylene having some organic/inorganic compounds as a part, it can be burned to provide a source of energy as heating for buildings or carpet heating.
Polyethylene bags can be recycled over and over to reduce the need to make new polyethylene products, reducing the impacts on the environment as well
Disadvantages
The disposed polyethylene products take 500 years to decompose, due to its strong structure and due to this space for the landfills are becoming limited.
The landfills were the polyethylene products are disposed are destroying green wildlife and many habitats.
The products of polyethylene are produced using crude oil, which is a non-renewable fossil fuel, however due to most of the products are not burring to extract this fossil fuels we will gradually run out of it.
Due to the combustion of polyethylene to extract the crude oil and produce energy, also produces carbon dioxide, which the greenhouse gas is the leading factor of global warming
Large amounts of energy is required manufacture polyethylene and thus required to use of crude oil and coil to power the machines, thus increasing greenhouse gases release into the environment.
Evaluation:
Economic cost:
Modern society demand for polyethylene is increasing each at 4%, by 2018 99.6 million metric tons was calculated to be produced scene it’s discovery, and a value of 164 billion dollars were spent. However due to the ever-increasing consumer needs and manufacturing activity Polyethylene will continue to be the most widely used plastic product in the global. Due to polyethylene’s versatility, easy processability, low cost and recyclability, its development will only increase due to the improvements on the polymerisation catalysts, thus it will lead to higher need, thus increasing it’s over cost. However due to its high decompose time many polyethylene products, like plastic bags have become subject to environmental regulations and bans.
Social cost:
The social cost of polyethylene is decreasing as more and more products that were made using metals and other plastics are becoming out dated and polyethylene is beginning used more due to its versatility, easy processability, low cost and recyclability, thus products were individuals would have to pay 1000 dollars decrease to 800 dollars or even less. However, that does not mean the actual cost of the polyethylene is going to decrease, as polyethene is becoming 2-5 cents more expansive each year, this is due to more products are need and the resources needed to manufacture polyethylene are becoming more and more limited.
Environmental impact:
The disposed polyethylene gets sent to landfills around the word, however the use of land fills is bad for the environmental, as the disposed polyethylene products takes 500 years to decompose. Further leaks do occur which threaten the environment even more as they pollutants the soil and water. Scientist estimate that 165 million tons of polyethylene products have already contaminated our oceans threatening the health and safety of marine life. They also estimate that an average of 8.8 million tons of polyethylene to enter our ocean each year. The products include polyethylene fibres no longer than 5 millimetres longs, which possess the risk of being ingested by marine wildlife. Also, the combustion of polyethylene to extract the crude oil and produce energy, also produces carbon dioxide which speeded up the rate of global warming.
Political implications:
Due to the manufacturing and disposal of polyethylene produces carbon dioxide which speeded up the rate of global warming. Also, most of its products are endangering our land and marine wildlife. Government officials are increasing the taxes paid of the production of these products to slow the rate that our planet is deteriorating, as of now most plastic bags are recyclable and cost 6-9 cents more per bag to produced, thus most large and low business are making environmental friendly bags with decompose easily and are reusable and have a strong properties to carry heavy objects.
Benefits to society:
Polyethylene products have a very smooth surface and is easy to clean and maintain, also well the products are light to transport and easy to install, also having a cost and this way cheaper than steel, fibreglass or concrete. This ensures the society to same both time and money. Due to its versatility, easy processability, low cost and recyclability, the products are ideal for every day items, also due nature, they can be moulded into anything needed. For example, blow-moulded bottles for milk, household cleaners, blow-extruded grocery bags, construction film, agricultural mulch, injection-moulded pails, caps, appliance housings, and toys, trash, agricultural mulch, wire and cable insulation and squeeze bottles.
Conclusions and Recommendations:
In my honest opinion, polyethylene is a very useful, versatile and highly effective polymer, which current modern society can’t function without. As polyethylene possess many properties, most plastic products are nowadays manufactured using it. Although Polyethylene is recycled and can be reused, it’s not an environmentally friendly product, as it can take up to 500 years to decompose in landfill sites and consists of crude oil, which is a non-renewable source of fuel, thus its production cost is increasing and oneday we might not be able to manufacture anymore. Also, the production and burning of polyethylene products, produce large amount of Carbon Dioxide, which contributes to global warming and the melting of the ice caps and the landfills leak and endanger our wild life. With this in consideration, I soul hearted believe that we should invited a more ecofriendly product that’s an alternative to polyethylene, which still achieves the same purposes and holds the same benefits to society.
Referencing APA Style:
(2019). Retrieved from https://sciencing.com/ldpe-recycled-6360593.html
Cho, R. (2019). What Happens to All That Plastic?. Retrieved from https://blogs.ei.columbia.edu/2012/01/31/what-happens-to-all-that-plastic/
Plastic bags – costs to environment and economy | National Retail Association. (2019). Retrieved from https://qldbagban.com.au/plastic-bags-costs-environment-economy/
polyethylene | Properties, Structures, Uses, & Facts. (2019). Retrieved from https://www.britannica.com/science/polyethylene
Polyethylene: Manufacturing Cycle and Environmental… | Bartleby. (2019). Retrieved from https://www.bartleby.com/essay/Polyethylene-Manufacturing-Cycle-and-Environmental-Impact-P3TGMPZVJ
Rototec. (2019). Retrieved from http://www.rototec.it/en/rototec.asp?id=7
Thomas, G. (2019). Recycling of High-Density Polyethylene (HDPE or PEHD). Retrieved from https://www.azocleantech.com/article.aspx?ArticleID=255
World Polyethylene. (2019). Retrieved from https://www.freedoniagroup.com/industry-study/world-polyethylene-3210.htm
Essay Writing Service Features
Our Experience
No matter how complex your assignment is, we can find the right professional for your specific task. Contact Essay is an essay writing company that hires only the smartest minds to help you with your projects. Our expertise allows us to provide students with high-quality academic writing, editing & proofreading services.
Free Features
Free revision policy
$10Free bibliography & reference
$8Free title page
$8Free formatting
$8How Our Essay Writing Service Works
First, you will need to complete an order form. It's not difficult but, in case there is anything you find not to be clear, you may always call us so that we can guide you through it. On the order form, you will need to include some basic information concerning your order: subject, topic, number of pages, etc. We also encourage our clients to upload any relevant information or sources that will help.
Complete the order form
Once we have all the information and instructions that we need, we select the most suitable writer for your assignment. While everything seems to be clear, the writer, who has complete knowledge of the subject, may need clarification from you. It is at that point that you would receive a call or email from us.
Writer’s assignment
As soon as the writer has finished, it will be delivered both to the website and to your email address so that you will not miss it. If your deadline is close at hand, we will place a call to you to make sure that you receive the paper on time.
Completing the order and download