1.Tort of Negligence is defined as the legal action which is taken by the innocent parties against the party who owns duty of care towards that innocent party. It must be noted that, this cause of action can only be taken when other party in under obligation to take reasonable care and fails to take reasonable care because of which innocent party face damages and injury. Three essential factors are stated below, and all these factors must be proved by the plaintiff to take action under this cause of action:
Duty to take care- the most important element under this cause of action is the duty to take care. Defendant must own duty to take care towards the plaintiff and this duty must be existed at the time when negligence is committed by the defendant. Obligation of the party to comply with the standard care is the obligation which is recognized by the law and the main purpose of this obligation is to prevent the harm caused to the plaintiff. The most important element of this obligation is foreseeability which means this obligation is emerged in those circumstances when damage caused to the plaintiff is foreseeable in nature if defendant fails to comply with the standard care. Another important element of duty of care is the closeness between the parties, which means plaintiff and defendant must be sufficiently close with each other (Bolton v Stone [1951] AC 850). If two of these elements are present then only defendant owns duty to take reasonable care towards the plaintiff. Civil Liability Act 1936 recognized the concept of the negligence under part 6 of the Act, and section 31 of this Act defines the provision in context of the duty to take care.
Breach of duty- another important factor under this cause of action is the breach of duty, which means defendant who owns duty to take reasonable care towards the plaintiff must breach such duty. In other words, defendant does not complied with the required standard of care. It must be noted that, for proving that defendant beach the duty to take care; court evaluates the standard of care which is expected from any reasonable person in the similar situation (ALRC, 2018).
Damages- last factor under this cause of action is the damages or injury caused to the plaintiff because defendant breach duty of care (Jaensch v Coffey (1984) 155 CLR 549)
As per the general rule, in case any product contains any defect related to the safety, then in such case person who manufactured the product is held liable towards the ultimate consumer. Tort of negligence recognized the product liability of the manufacturer and as per this liability manufacturer owns duty to take reasonable care towards the ultimate consumers while manufacturing its product. In context of this rule, manufacturer is the person who creates the product, assemble the goods, import the goods, and reflect itself as manufacturer of the product among the people. It must be noted that manufacturer of the product can be held liable for any injury or damages that caused to the consumer of the product.
Rule related to the manufacturer liability was recognized by the Court in case Donoghue v Stevenson 1932 AC 562. In this case, the central issue which was considered by the Court was “whether plaintiff had any right to file suit against Mr. Stevenson (manufacturer of the product) or not”. In this, Court decided that manufacturer of the product will be held liable for the safety defect. Court further stated that liability of the reasonable care is imposed on the manufacturer of the product, which means manufacturer is under obligation to take reasonable care while manufacturing the product. In this case, court recognizes the tort of negligence for providing the reasoning of the decision (Law revision, n.d.).
Decision of the Court in this case includes two types of test that were foreseeability test and the proximity test. Under the foreseeability test, court determine whether damage or injury caused to the plaintiff was foreseeable in nature and if such damage or injury was foreseeable then defendant was liable under tot of negligence. Another test was the proximity test which determines the closeness and nearness between the parties. Any person who was close or near to the plaintiff was liable to take reasonable care. In case both the tests are positive then defendant was held liable for the negligence.
In context of this case, manufacturer and any other person falls under the category of manufacturer was held liable to take care while manufacturing their products for the ultimate consumers, because it is clear hat products are manufactured by the ultimate consumer and they are going to consume it. Therefore, it is necessary for the manufacturer to avoid any foreseeable harm to the consumer.
In this case, numbers of consumers are injured by using product TM31 supplied by Thermomix and manufactured by the Vorwerk & Co. KG., because of which both Thermomix and Vorwerk are fall under the category of the manufacturer. In this case, both foreseeability and proximity test are applied because in this relationship exists between the parties and injury caused to the consumers are foreseeable in nature. Therefore, it can be said that manufacturer own duty of care towards the consumers but because of negligence they breached this duty of care (Federal register of legislation, 2008)
2.ALRC made proposal in context of implemented cap on the damages. It must be noted that this cap is applicable on all the damages except one that is damage related to economic loss. When any person sue the another person for personal injury, then plaintiff seek to get money damages for the injury caused to them. Generally two types of damages are there which can be claimed by the plaintiffs that are economic damages and non-economic damages. Economic damages are considered as the particular cost which have incurred by the plaintiff for their injury and non-economic damages are considered as other type of damages such as pain, distress, etc.
Damages cap are defined as those provisions which put limitation on the amount of non-economic damages that may be awarded to the plaintiff. Currently, each state decides its own caps for the personal injury damages. The main purpose of putting caps on the damages is put limitation on the amount claim by the plaintiff. In other words, plaintiff usually choose those claims which have higher award of damages and this cherry picking Detroiter the main purpose of the provision because high awards generally put drag on the overall economy (ALRC, 2018).
The role played by damage cap is considered as significant and different types of persons had different views related to this. Number of authorities stated that damages caps are unfair on part of the plaintiff and for those who bring the lawsuit.
It must be noted that damage caps are an effort which made for managing the high costs of the business because in end this cost is passed on the consumers and this is done by reducing the liability of the manufacturers and service providers. In other words, if any extra cost is imposed on the business organizations which they are fail to bear then such cost is ultimately retrieved from the consumers by the business organization.
Additionally, one more reason is also there for imposing caps on damages and that is managing the cost related to the operating the business. In other words, plaintiffs usually play lotto with the lawsuits by choosing those causes of action which includes higher damages and these caps discourage the peoples to play lotto with the lawsuits and save both time and cost of the country. Numbers of peoples are there which only file suit for the purpose of wining lot of money and these caps impose restriction on such practices. Court by imposing these caps ensures the protection of the justice system from those people who are actually injured and seeks compensation (Find law, n.d.).
3.Australian consumer law is introduced for ensuring the protection of the consumers from unfair practices conducted by the manufacturers and distributes of the product. Schedule 2 of the Competition and Consumer act 2010 contain different parts which include number of provisions for protecting the rights of the consumers. Part 3-5 of the Act defines the liability of the manufacturer in context of safety defect occurred in the product. This part of the ACL impose obligation on the manufacturer to provide safe products and make them liable in specific types of losses which caused to the plaintiff in context of defect occurred in the product.
As stated by section 138 of the Act, manufacturer of the product is liable towards the plaintiff, in case plaintiff suffered any injury from the goods and services supplied by manufacturer while engaging in trade or commerce and such goods have any safety defect. It must be noted that, plaintiff must suffered injury or damage because of the safety defect in the product. It is further described by the section that it is possible for the individual to recover the goods by filing case in lieu of injury or loss caused to the plaintiff.
Generally, safety defects are present in the contract in case safety related to the goods manufacturer fails to comply with the expectation of the consumers. In other words, gods manufactured by the manufacturer fails to meet the standard of care and affected from any safety defect which cause injury to the consumer. This liability involve two factors, first factor determines the expectation on part of the reasonable person and second factor determines whether manufacturer comply with that expectation or not. This test is considered as the objective test and relies on the person’s knowledge and expectation. In this context, it can be said that following factors are present which must be recognized by the Court for determining liability:
Consumers cannot state that goods are defective only on the fact that later manufacturer supplied more safe products. It must be noted that, goods supplied by the manufacturer can be marked as unsafe product if is operated in any such circumstances in which manufacturer fails to provide alert warning to the consumers in context of the damages which might be caused by the Product. If loss or damage is suffered by any person in context of safety defect occurred in the product, then such person has right to file claim against the manufacturer:
Part 3-5 of the ACL does not define any provision of offence in context off safety defect, and it only defines the cause of action on the basis of which plaintiff can take action against the manufacturers of the goods. In this plaintiff can seek compensation from the manufacturer on different grounds from the manufacturer. However, this part does not provide provisions related to the remedies and penalties grant by Court for this purpose.
In the present case, person who suffered injury from the safety defect occurred in TM31, which is manufactured by the Vorwerk & Co. KG and supplied by the thermomix, can take action against the manufacturer under this part. In this injured person can take action under section 138 of the ACL and as per this section manufacturer of the product is liable towards the plaintiff, in case plaintiff suffered any injury from the goods and services supplied by manufacturer while engaging in trade or commerce and such goods have any safety defect. It is further described by the section that it is possible for the individual to recover the goods by filing case in lieu of injury or loss caused to the plaintiff. Therefore, consumers can seek compensation from manufacturer under this part.
This part also states some defenses which can be used by the manufacturer against the claim made by the plaintiff. Section 142 and 148 of the Act defines these defenses and as per these defenses:
References:
ALRC, (2018). Authorizing what would otherwise be a Tort. Retrieved on 18th May 2018 from: https://www.alrc.gov.au/publications/right-sue-tort.
ALRC, (2018). Remedies and cost. Retrieved on 18th May 2018 from: https://www.alrc.gov.au/publications/12-remedies-and-costs/damages.
Bolton v Stone [1951] AC 850
Civil Liability Act 1936- Section 31
Clayton UTZ, (n.d.). The Australian Consumer Law. Retrieved on 18th May 2018 from: https://www.google.co.in/search?q=Part+3-5+of+the+Australian+Consumer+Law+(ACL)&rlz=1C1CHBF_enIN742IN742&oq=part+3-5&aqs=chrome.1.69i59l2j69i57j69i60l2j0.4306j0j4&sourceid=chrome&ie=UTF-8.
Competition and Consumer Act- Section 138.
Competition and Consumer Act- Section 142.
Competition and Consumer Act- Section 148.
Cook v Pasminco [2000] FCA 677.
Donoghue v Stevenson 1932 AC 562.
Federal register of legislation, (2008). Law of Negligence and Limitation of Liability Act 2008 (NI). Retrieved on 18th May 2018 from: https://www.legislation.gov.au/Details/C2016Q00058.
Find Law, (n.d.). What is a Damages Cap? Retrieved on 18th May 2018 from: https://nerdyturtlez.com/tutor/order.php?id=737755.
Jaensch v Coffey (1984) 155 CLR 549
Law Revision, (n.d.). The law of tort. Retrieved on 18th May 2018 from: https://www.lawvision.com.au/uploads/PDFs/Tort%20Law%20.pdf.
Essay Writing Service Features
Our Experience
No matter how complex your assignment is, we can find the right professional for your specific task. Contact Essay is an essay writing company that hires only the smartest minds to help you with your projects. Our expertise allows us to provide students with high-quality academic writing, editing & proofreading services.
Free Features
Free revision policy
$10Free bibliography & reference
$8Free title page
$8Free formatting
$8How Our Essay Writing Service Works
First, you will need to complete an order form. It's not difficult but, in case there is anything you find not to be clear, you may always call us so that we can guide you through it. On the order form, you will need to include some basic information concerning your order: subject, topic, number of pages, etc. We also encourage our clients to upload any relevant information or sources that will help.
Complete the order form
Once we have all the information and instructions that we need, we select the most suitable writer for your assignment. While everything seems to be clear, the writer, who has complete knowledge of the subject, may need clarification from you. It is at that point that you would receive a call or email from us.
Writer’s assignment
As soon as the writer has finished, it will be delivered both to the website and to your email address so that you will not miss it. If your deadline is close at hand, we will place a call to you to make sure that you receive the paper on time.
Completing the order and download