Waste management is defined as the process and activities that is used to manage waste in the whole process of generating the waste to the final disposal (Kiddee, Naidu and Wong 2013). E-waste is one of the common wastes that is generated in the modern world which is actually formed as a result of the excessive use of electronic gadgets as well as the discarded electronic devices. E-waste is also considered when the discarded electronic gods are given for resale and reuse of the materials (Hoornweg and Bhada-Tata 2012). The following report is an analysis on the waste management issue and also considers the stakeholders along with the proposed methodology for the same. The following paragraphs highlight on the data collection methods as well as the validating the objectives with the risk factors associated.
The waste management situation in Australia is of medium to low nature as in most of the places, the condition of waste management along with the rate of reuse of recycling of the products is very low. According to Yang (2017), most of the wastes are just left at the landfills which creates soil and environmental pollution at a massive scale. In addition, the continuous disposal of E-waste into the places also creates massive pollution of water which is one of the pivotal cases. Therefore, the scope of waste management is not very bright which needs to be made better with efforts.
A stakeholder is defined as a person who has interest or is responsible for a particular matter. The stakeholder in waste management practises are the municipality as well as the residents of each of the city. Moreover, the companies who are producing the wastes are also responsible for the waste management which is one of the most important means.
There are a number of ways in which the waste management disposal can be conducted which are as follows –
The data that needs to be collected for the better working and conducting the waste management process is done with the help of the municipality government and also to make sure that the data for the E-waste management is done from the NGOs and government waste management centres (Inglezakis and Moustakas 2015). The local places can get all the dustbin bins which can be collected by the researchers for the better analysis of the different forms of waste.
The timeframe needed for the conduction of the research is approximately 6 months from the day of starting of the programme.
Though Australia in an average produces about 1.5 tonnes of waste per person, it has been estimated that some of the places produces more waste materials than others.
|
Types of waste materials |
Location |
Rating of the severity |
|
Plastics and non-biodegradable waste |
Cities, towns and congested areas |
Severe as the amount of plastic disposed is severe and is increasing on a day to day basis |
|
Household waste |
From all over the continent |
Medium to high as an amount of the waste is biodegradable which makes the waste not so severe. The non-bio degradable part is then not acceptable. |
|
Industrial waste |
Industrial towns and cities |
Severe as this causes a number of pollution level and also makes sure that these wastes leads to the generation of a number of other waste materials (Greenberg 2017). |
|
Radioactive waste |
From atomic plants and radioactive plants |
Severe as most of the wastes are toxic in nature that can harm the whole environment |
Figure – Data collection chart
(Source – As created by the author)
The process of validating data is done after doing an input in the methods and also after checking the integrity as well as the validity of the data. According to Inglezakis and Moustakas (2015), the waste management data is collected via various government websites and NGOs which make sure that the data obtained is of genuine value. The process of validating data involves collection of data and also the research is being done after assessing the number of records, the ids and the size of the data. In addition, the source of the data is also looked at and at the end the mapping of the research is done (Greenberg 2017). In case of the waste management technique of Australia, the waste management technique is created with the data from both the government website as well as the NGOs and individual research is created which is then advised to be integrated for the better results in the concerned manner.
The waste management data is collected by individual research and then analysed to make sure that the data is validated with the concerned waste (Brunner and Rechberger 2015). The process of validating the data is then used for the analysis of the given waste management statistics in Australia.
The decision making of the waste management can be assessed by using the tools like the life cycle assessment as well as the health risk assessment of the task. According to Zaman (2014) the life cycle assessment is used to find out the impact of the different stages of the product right from raw materials to the finished product through the various stages of the product in the required span of time. The health risk assessment of the work is defined as the way in which the individuals are provided the role of evaluation in the health risk due to certain aspects as well as the quality of life in the concerned matter.
Both the life cycle assessment as well as the health risk assessment of the work is useful for making sure that the effects of the risk management is measured. Both the assessment measures will be helpful for making sure that the waste management methods are used in the required case (Glendon, Clarke and McKenna 2016). Summarising both the assessment, it can be said that that both the life cycle measure as well as the health risk measure is useful for making sure that the waste management method is implied in the zone of Australia.
Waste management is one of the most important measures in the modern world due to the immense risk that is there if the waste is not properly maintained and also if the waste is not properly disposed in the required span of time. According to Glendon, Clarke and McKenna (2016), the priority for the disposal of waste management is involved due to the involvement of a number of options like health hazards, polluting the environment as well as the risk of making sure that that the waste is being properly managed to have a detailed analysis of the risk that is being associated with the same. The risk for the waste management concept is of high value as the risk factor for this matter is also quite high.
The communication strategy is defined as the documentation that is being created for expressing the goals as well as the various methods for outreaching the activities of the organization. The communication strategy of waste management technique is delivered from the government to the people as well as the people who are involved in the waste management of the organization. The communication strategy of the identified stakeholder is through the media communication and also through the mode of advertisement that is being measured (Wilson et al. 2012). The communication is to be made through various strategies as well as the media ways that is needed in the communication plan. The identified stakeholder of the waste management issue is the common people as well as the government who should have effective communication plan to make sure that their waste management technique is being followed.
The media has tremendous influence on the stakeholders who are associated with the risk management of the Australian premise especially the E-waste management technique in the concerned span of time. The media influences the stakeholders in their working and also makes sure that people involved in the waste management disposal is given adequate due. All the aspect of media including digital and print media is involved in making sure that the stakeholders have ample knowledge and responsibility for the waste matter management (Chandrappa and Das 2012). In Australia, the stakeholders are informed through the concepts of print and digital media that the risk factor for waste management is there which again makes sure that the risk factor associated with the same are also analysed. The media has some of the greatest influences on the people and so a promotional event or even an advertisement can help to make sure that the risk affected with waste is generated and addressed.
The effect on media is one of the most important aspects in the stakeholder management sector while for the ultimate risk management approach in terms of the waste management technique, the effect of the risk management sector is also analysed within the concerned span of time (Chandrappa and Das 2012). The ultimate risk management approach is to analyse the physical, environmental as well as health risk that is associated with the waste management technique.
In Australia, the effect of media on the health of management in the sector is of prime importance as with the required span it becomes way important for the people as well as the authorities to have substantiate amount of reflection (Zhang, Schnoor, and Zeng 2012). The influence of social media in this case is also important as with the advent of social media in the said case, it is of prime importance to have the level in the importance of waste management technique.
gure – Chart for the Monitoring and review of programme for development
(Source – As created by the author)
In the above, the review and the monitoring of the risk assessment of the task is being done which is one of the major instances of the waste management is being done which is a part of the risk management associated (White, Dranke and Hindle 2012). The monitoring and the review of the whole concept of the task is according to the risk management of the Australian waste management technique.
Conclusion:
At the end of the report, it is to be analysed that the risk management in terms of the waste management technique is to be assessed in the country of Australia and also the E-waste management is also conducted to make sure that each of the waste management plan is there for the confirmed span of time. The different aspects of the E-waste along with the waste management technique is being followed which makes sure that the risk of the waste management process is being done. The report is an analysis of the various strategies and methods that is needed for the analysis of the waste management in the concerned span of time. At the end, it can be stated that the waste management of Australia is analysed on the basis of the various strategies and methods of the same is to be followed.
Reference:
Blackman Jr, W.C., 2016. Basic hazardous waste management. Crc Press.
Brunner, P.H. and Rechberger, H., 2015. Waste to energy–key element for sustainable waste management. Waste Management, 37, pp.3-12.
Chandrappa, R. and Das, D.B., 2012. Solid waste management: Principles and practice. Springer Science & Business Media.
Glendon, A.I., Clarke, S. and McKenna, E., 2016. Human safety and risk management. Crc Press.
Greenberg, M.R., 2017. Hazardous waste sites: The credibility gap. Routledge.
Hoornweg, D. and Bhada-Tata, P., 2012. What a waste: a global review of solid waste management.
Inglezakis, V.J. and Moustakas, K., 2015. Household hazardous waste management: A review. Journal of environmental management, 150, pp.310-321.
Kiddee, P., Naidu, R. and Wong, M.H., 2013. Electronic waste management approaches: An overview. Waste Management, 33(5), pp.1237-1250.
Wang, J. and Xu, Z., 2015. Disposing and recycling waste printed circuit boards: disconnecting, resource recovery, and pollution control. Environmental science & technology, 49(2), pp.721-733.
White, P., Dranke, M. and Hindle, P., 2012. Integrated solid waste management: a lifecycle inventory. Springer Science & Business Media.
Wilson, D.C., Rodic, L., Scheinberg, A., Velis, C.A. and Alabaster, G., 2012. Comparative analysis of solid waste management in 20 cities. Waste Management & Research, 30(3), pp.237-254.
Yang, J., 2017. Hazardous waste management. In Environmental Management in Mega Construction Projects (pp. 255-263). Springer, Singapore.
Zaman, A.U. and Lehmann, S., 2013. The zero waste index: a performance measurement tool for waste management systems in a ‘zero waste city’. Journal of Cleaner Production, 50, pp.123-132.
Zaman, A.U., 2014. Measuring waste management performance using the ‘Zero Waste Index’: the case of Adelaide, Australia. Journal of Cleaner Production, 66, pp.407-419.
Zhang, K., Schnoor, J.L. and Zeng, E.Y., 2012. E-waste recycling: where does it go from here?.
Zhang, Q., Dor, L., Fenigshtein, D., Yang, W. and Blasiak, W., 2012. Gasification of municipal solid waste in the Plasma Gasification Melting process. Applied Energy, 90(1), pp.106-112.
Essay Writing Service Features
Our Experience
No matter how complex your assignment is, we can find the right professional for your specific task. Contact Essay is an essay writing company that hires only the smartest minds to help you with your projects. Our expertise allows us to provide students with high-quality academic writing, editing & proofreading services.
Free Features
Free revision policy
$10Free bibliography & reference
$8Free title page
$8Free formatting
$8How Our Essay Writing Service Works
First, you will need to complete an order form. It's not difficult but, in case there is anything you find not to be clear, you may always call us so that we can guide you through it. On the order form, you will need to include some basic information concerning your order: subject, topic, number of pages, etc. We also encourage our clients to upload any relevant information or sources that will help.
Complete the order form
Once we have all the information and instructions that we need, we select the most suitable writer for your assignment. While everything seems to be clear, the writer, who has complete knowledge of the subject, may need clarification from you. It is at that point that you would receive a call or email from us.
Writer’s assignment
As soon as the writer has finished, it will be delivered both to the website and to your email address so that you will not miss it. If your deadline is close at hand, we will place a call to you to make sure that you receive the paper on time.
Completing the order and download
